SKU: 72166426776

HD Kawasaki KRX Ball Joint by Black Ops Machine

$80.95 $89.95
Save 10%
No.2 Bestseller on sm10m.ch >

Pay in installments of $22.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 4 - Aug 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

HD Kawasaki KRX Ball Joint by Black Ops MachineSKU: 07 50 00 ***SOLD INDIVIDUALLY*** These ball joints are made to be especially heavy duty, with the housing and support cup as well as the stud made from 4340 chromoly and 300m steel, respectively. The dust boots are made from CR Neoprene, and the adjustment plate cap is 6061 aluminum. This is both the Upper and Lower ball joint for your vehicle. Please ensure that these are the right ball joints for your vehicle by checking our fitment tab below.

SKU: 07-50-00

***SOLD INDIVIDUALLY***

These ball joints are made to be especially heavy-duty, with the housing and support cup as well as the stud made from 4340 chromoly and 300m steel, respectively. The dust boots are made from CR/Neoprene, and the adjustment plate cap is 6061 aluminum.

This is both the Upper and Lower ball joint for your vehicle.

Please ensure that these are the right ball joints for your vehicle by checking our fitment tab below.

These ball joints work for the upper and lower ball joint on your KRX.

At Black Ops Machine, the leading online supplier of high-quality aftermarket UTV parts, we understand that your off-road adventures demand nothing but the best. That’s why we’ve developed the HD Kawasaki KRX Ball Joint, designed to keep you riding longer, harder, and faster without compromise. 

Our HD Kawasaki KRX Ball Joint Replacement is a game-changer for those looking to unleash the full potential of their ride. Made from heavy-duty materials and precision-engineered for maximum durability, this ball joint can handle even the most challenging terrains with ease. 

Whether you’re racing through rough trails in Arizona or conquering Rocky Mountains, our ball joint for KRX will ensure that your suspension stays tough and responsive. 

KRX Ball Joint Upgrade

So – what sets our HD Kawasaki KRX Ball Joint apart from other aftermarket options? Here are just a few reasons why it stands out:

  • Easy Installation:

    Our KRX ball joint upgrade is designed to be a direct replacement for your stock part, meaning no modifications or special tools are required. Simply remove your old ball joint and install our HD version for an instant upgrade.

  • Increased Reliability:

    We know how important reliability is for off-road enthusiasts, which is why our ball joint is built to withstand the toughest conditions. With durable construction and high-quality materials, you can trust that our product will last through countless adventures.

  • Improved Performance:

    By upgrading your stock ball joint to our HD version, you’ll notice a significant improvement in your ride’s handling and suspension. Our ball joint allows for smoother and more precise steering, making it easier to navigate through any terrain.

  • Affordability:

    At Black Ops Machine, we believe that quality shouldn’t come at a hefty price tag. That’s why our HD Kawasaki KRX Ball Joint is affordable without compromising on durability or performance. You’ll get a top-of-the-line product at a reasonable cost.

So why settle for less when you can have the best? Upgrade to our HD Kawasaki KRX Ball Joint today and experience the ultimate off-road ride without compromise. And don’t forget to check out our other high-performance aftermarket parts for even more ways to enhance your

Built to Endure the Toughest Terrains

Say goodbye to weak OEM ball joints that fail under pressure. Our HD Kawasaki KRX Ball Joint is crafted from the toughest materials to deliver exceptional durability and reliability:

  • 4340 Chromoly Housing & Cap

    : Engineered for superior strength and resistance to impact.

  • 300M Steel Stud

    : Provides unparalleled durability, ensuring your ball joint withstands the harshest conditions.

  • CR/Neoprene Dust Boots

    : Keep out dirt and debris, extending the life of your ball joint.

  • 6061 Aluminum Adjustment Plate Cap

    : Allows for precise adjustments to suit your driving style.

Why Choose the HD Kawasaki KRX Ball Joint?

Seamless Compatibility

Engineered specifically for the upper and lower ball joint on your KRX, these heavy-duty replacements fit perfectly, providing a seamless upgrade to your vehicle’s suspension system.

Maximum Performance

Our ball joints aren’t just about toughness; they’re about performance. With Black Ops Machine, you get components that enhance handling and stability, giving you a smoother, more responsive ride. Whether you’re navigating rugged trails or tackling steep inclines, our ball joints keep you in control.

Easy Maintenance

Fully adjustable and rebuildable, these ball joints allow for easy disassembly, cleaning, and re-greasing, ensuring minimal long-term maintenance and maximum ride time.

Peace of Mind

We stand by our products with confidence, offering hassle-free returns if our ball joints don’t meet your expectations. Your satisfaction is our priority.

Frequently Asked Questions
Q – What makes the HD Kawasaki KRX Ball Joint better than OEM parts?

A – Our ball joints are made from premium materials like 4340 chromoly and 300M steel, offering superior strength and durability compared to standard OEM parts. This means fewer replacements and more time enjoying your ride.

Q – Can I install the HD Kawasaki KRX Ball Joint myself?

A – Yes, if you have basic mechanical skills and the right tools, you can install it yourself. However, if you’re unsure, it’s always wise to consult with a professional mechanic to ensure proper installation.

Q – Will these ball joints fit my KRX model?

A – These ball joints are designed specifically for the upper and lower ball joint on Kawasaki KRX models. For the best fit, consult our compatibility chart or contact our customer service team.

Fitment

  • Kawasaki Teryx KRX 1000 : 2020+
  • Kawasaki Teryx KRX 4 1000 : 2023+

CB 6/5/25

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 72166426776

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 19 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
JR
Bozeman, US
★★★★★ 5
Fantastic Product
Size: 13"-27", Style: Single, Size: 13"-27", Style: Single
The Wali Single Monitor Desk Mount works better than I expected. First, the basics. The mount comes well packed and the instructions are very simple to understand. There is so little assembly required that the instructions are almost not needed. Assembly and installation can be done in less than ten minutes (not including cable management if you choose to use that feature). Adjusting everything is easy. Overall quality of the parts and the assembled product are quite good. I have two monitors that I wanted to mount on a flat desktop. I needed to be able to get the monitors right next to each other and still have the desk flat against the wall. Most double monitor stands will not allow for this unless your monitors are the perfect size for the spread of the arms. The movable arms will usually flex toward the wall if you want the monitors to be edge-to-edge with each other. The result is the desk having to be offset from the wall to accommodate this. By using two single monitor stands, I am able to move the posts to positions that allow the arms to be extended in such a way that everything is flat with the wall. The other frequently stated issue with most monitor stands is that the arms have hydraulic pistons and/or springs to deal with the weight of the attached monitors so they are easy to move up and down. These pistons and springs are often of poor quality and either fail quickly or don't work as expected from the get-go. This is not a problem with the Wali Single Monitor Desk Mount. The arm is solidly attached to the 16" pole and only moves up and down by loosening the arm mounting and sliding the arm up or down on the pole. The arm, once set to the desired height, can be move forward, backward, side-to-side and tilt. This makes for a much sturdier setup with no pistons or springs. This system works very well, since I (and I think most people) have little need to move a monitor up or down after the initial installation. I leave the included Allen wrench stuck in one of the vertical facing screws behind a monitor so that it is always handy but out of sight. If I do need to move the monitors up or down, the tool is right there. I will buy two more of these for my wife's desk.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 3, 2024
K
Verified Purchase
Kirk Tinsley
Cuba, US
★★★★★ 5
Rock-solid tall mount to hold a monitor above a large monitor
Size: 13"-32", Style: Single, Size: 13"-32", Style: Single
I bought the 31.5 model to mount a 27" monitor above a 32" monitor on my desk. This is the first monitor mount I have ever purchased and I am thrilled with the entire mount! The installation instructions were simple to follow. All hardware was clearly notated and packaged by part number. The mount holds the 27" monitor (which isn't all that light) perfectly above my desk monitor and is very stable. Adjustment is easy and effective and It doesn't wobble one bit. The cable routing clips work well and are literally a snap to install. I used the clamp mount but a screw-down desk mount is included.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2025
N
Verified Purchase
Nathan B.
Draper, US
★★★★★ 5
Quality Stand
Size: 13"-27", Style: Triple
Solid, heavy duty and well made. I purchased this as I was adding a third monitor to my setup. So I had to choose between buying a 2nd mount that had one arm on it, or just replace my 2 arm setup with a single 3 arm setup. I'm glad I went this route. Very easy to assemble and it feels heavy duty. I've been using it daily for about 2 months now and it's held up perfectly. Zero issues with assembly and the instructions are well written. The mount options are solid and the metal is thick. Quality product at an amazing price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2025
T
Verified Purchase
terry
Louisville, US
★★★★★ 4
Overall, very good for the price.
Size: 13"-32", Style: Single, Size: 13"-32", Style: Single
For the price, I’m pleased with it. Overall, it’s a sturdy stand with quality machining. All the screws went in easily, poorly machined products have crooked holes or bad threads. The mount base comes with 2 types, standard mount for a desktops surface. The other one is for desktops with monitor holes/cabling drilled through them. All the parts are heavy gauge and I encountered no difficulty during assembling. There seems to be a tension screw for the tilt feature. I had to tighten the screw that holds the tilt joint together because out of the box, the monitor flopped forward hard. I had to be mindful while mounting it to the main arm so it wouldn’t slam into my glass desktop. The 2 arms that allow you to move the monitor forwards and back, left and right were a little stiff, I loosened the screw a bit on the main arm, at the pole. That seemed to be all that was required. I tried to loosen the bolt where the 2 arms meet, and it wouldn’t budge. I didn’t force the issue. The instructions were adequate for assembly without covering anything else, like adjusting the tilt bolt for the weight of the monitor. So, while I think this was a good mount for the investment, there are tradeoffs to mention. I’m accustomed to swinging my monitors upward and dusting underneath them. Height is fixed by a screw on this one. I was struggling to install the monitor cables when I realized you can tilt the bottom toward you until the top or the monitor hits the pole, or, until it’s sitting nearly flat like a table. Elevated several inches above the desktop. I consider this a Pro / Con feature. Where the arm ties into the VESA mount, the fit is a little sloppy. It’s not a safety concern but I can wiggle the monitor backwards and forwards at the outer edges “About ¾ inch “before feeling any resistance from the mount. Same goes for tilting. I don’t see this as much of an issue. Normally, I don’t foresee any outside forces acting in the monitor to create a problem. However, there’s room for improvement. The rest of the machining seemed steller. I have multiple computers in different rooms. 32” monitors are used as primary monitors with 32” to 23” as secondaries. I like mine roughly 1” above the desk. That places the top of the monitor at my eye level and the ideal viewing angle. I have fully articulated, hydraulic mounts on most of my monitors. Nice ones for large heavy monitors run $75 to $100 and up. I paid $36 for this one. The……… WALI Monitor Arm Mount for Desk, Single Extra Tall Computer Desk Mount, Monitor Bracket Mount Stand Single, up to 32 inch, 22 lbs (M001XL), Black. Amazon lumps the reviews of similar products together, so I specified which mount I purchased. I’m using this one on a glass desktop, I’m attaching it to the same point I constructed from wood for a different mount. It didn’t lower the monitor low enough either. So, the top of that mounting point is 4” lower than the surface of the glass top. Despite being that low, I didn’t actually need the 32” pole / monitor mount, the 16” model would have worked. There’s still 2” of pipe available above the arm. The 32” was on sale & I didn’t know if the 16” would suffice. The pole is a screw together 2 piece. I unscrewed / removed the other pole as it looked out of place in my dual computer setup. That leaves a hole in the top of the pipe / mount. I wish they included a cap for that. The top pipe has a cap but of a different diameter. I’d like to give it 4 ½ Stars but Amazon won’t let me. I’ve got to go with 4. Height adjustments with heavy monitors and an Allen wrench can present a challenge, it’s the nature of the beast and I won’t give it 5 stars for a few reasons. The sloppy VESA mount and loose tilt motion. No instructions that cover that, or if I was supposed to loosen the arm at the pole to improve motion. I would recommend this mount to others.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 18, 2024
J
Verified Purchase
J. Masotti
Boise, US
★★★★★ 5
Excellent mount, especially if you want your monitor mounted higher above the desk.
Size: 13"-32", Style: Single
This is the monitor mount I should have had all along. The extra tall pole allowed me to mount my 32" monitor at the correct height (something I couldn't do with the spring-mount I previously had. It came with good directions, everything needed for install except for a Phillips head screwdriver and a 10mm wrench for one cap nut. The arm that holds the monitor is highly adjustable, and once everything is tightened down, very sturdy. I recommend this one without reservations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 1, 2026

recommand products

Micro-precision drills / Solid carbide / Ø 0.450 mm / Company std. / Type N / TiAlN
37.54
Micro-precision drills / Solid carbide / Ø 0.420 mm / Company std. / Type N / TiAlN
33.96
Micro-precision drills / Solid carbide / Ø 0.470 mm / Company std. / Type N / TiAlN
33.96
Micro-precision drills / Solid carbide / Ø 1.130 mm / Company std. / Type N / TiAlN
30.03
Micro-precision drills / Solid carbide / Ø 1.180 mm / Company std. / Type N / TiAlN
33.45