AudioQuest Coffee Digital Coax CablePlease Call or Email us to place your orders! AudioQuest Coffee Digital Coax Cable at Vinyl Sound Toronto Canada The AudioQuest Coffee is a reference level 75 ohm S PDIF digital coaxial cable from AudioQuest (Irvine, California, USA), available at Vinyl Sound in Toronto, Canada. Built around Solid 10% Silver conductors, a Carbon Based 6 Layer Noise Dissipation System (NDS), and a Dielectric Bias System with Radio Frequency Trap, the Coffee represents

Please Call or Email us to place your orders!

AudioQuest Coffee Digital Coax Cable at Vinyl Sound Toronto Canada

The AudioQuest Coffee is a reference-level 75-ohm S/PDIF digital coaxial cable from AudioQuest (Irvine, California, USA), available at Vinyl Sound in Toronto, Canada. Built around Solid 10% Silver conductors, a Carbon-Based 6-Layer Noise-Dissipation System (NDS), and a Dielectric-Bias System with Radio Frequency Trap, the Coffee represents the most technically advanced digital coaxial cable in the AudioQuest lineup. Hard-Cell Foam insulation, a silver-plated braid shield, and cold-welded hanging-silver terminations directly over pure red copper complete a cable engineered to reduce jitter and RF noise in the digital audio signal path to the lowest levels achievable in a coaxial S/PDIF cable.

Solid 10% Silver Conductors and Dielectric-Bias System

The AudioQuest Coffee uses a solid center conductor drawn from a 10% silver alloy, the highest silver content of any conductor in the AudioQuest digital coaxial cable range. At this silver concentration, grain-boundary distortion and conductor-surface noise are reduced to levels substantially below what 1.25% or 5% silver conductors achieve, delivering a lower noise floor on both the signal conductor and the ground reference. Hard-Cell Foam insulation surrounds the silver conductor, providing a low-dielectric-constant environment that maintains precise 75-ohm impedance along the full cable length and minimizes the energy storage that causes phase shift and timing errors in the S/PDIF signal. The Dielectric-Bias System takes insulation performance a step further by applying a constant DC voltage field to the Hard-Cell Foam, preventing the insulation from participating in signal energy exchange and eliminating the frequency-dependent phase shift that unbiased dielectrics introduce across the audio bandwidth. An integrated Radio Frequency Trap prevents RF noise generated by the DBS battery pack from coupling into the signal conductor, ensuring the DBS field itself does not compromise the low noise floor it is designed to protect.

Carbon-Based 6-Layer Noise-Dissipation System

The AudioQuest Coffee's Carbon-Based 6-Layer Noise-Dissipation System is the most comprehensive NDS architecture AudioQuest applies to a digital coaxial cable. Six alternating layers of metal and carbon-loaded synthetic materials progressively absorb and reflect RFI at each stage before it can reach the ground-reference conductor, preventing the ground-plane modulation that conventional single-layer shields cause when they drain captured noise directly to component ground. This multi-stage carbon-layer approach targets the RF frequencies at which metal shielding alone is least effective, providing an additional absorption mechanism at each layer boundary. The silver-plated braid outer shield delivers high-conductivity, high-frequency RFI rejection as the final defensive layer, with silver's superior conductivity at radio frequencies providing greater attenuation than standard tinned-copper braid. In a digital coaxial application, the combined effect of the 6-Layer NDS and silver-plated braid is a dramatically lower RF noise floor at the DAC input, reducing the jitter contribution of the cable to its minimum achievable level.

Key Features

• Solid 10% Silver Conductor: Highest silver-content conductor in the AudioQuest digital coax range, delivering the lowest grain-boundary distortion and conductor-surface noise of any AudioQuest S/PDIF cable.
• Hard-Cell Foam Insulation: Low-dielectric-constant foam insulation maintains precise 75-ohm impedance and minimizes dielectric energy storage around the center conductor.
• Carbon-Based 6-Layer NDS: Six alternating layers of metal and carbon-loaded synthetics progressively absorb and reflect RFI before it reaches the ground reference, providing the most comprehensive noise dissipation in the AudioQuest digital coax lineup.
• Silver-Plated Braid Shield: High-conductivity silver-plated braid outer shield provides superior high-frequency RFI attenuation compared to standard tinned-copper braid designs.
• Dielectric-Bias System with RF Trap: Constant DC voltage field applied to the insulation prevents dielectric energy storage and phase shift, with an integrated RF Trap preventing DBS-generated noise from coupling into the signal conductor.
• Cold-Welded Hanging-Silver Over Pure Red Copper Terminations: Silver termination layer applied directly over pure red copper RCA plugs with no nickel underplating, joined via cold-weld process to eliminate solder-related signal degradation at the connection point.
• High-Speed Data Capacity: Engineered for reliable S/PDIF digital audio transmission at all standard sample rates up to 192kHz/24-bit.

Technical Specifications

Frequently Asked Questions

What is the AudioQuest Coffee digital coax cable?

The AudioQuest Coffee is a reference-level 75-ohm S/PDIF digital coaxial interconnect built with a Solid 10% Silver center conductor, Hard-Cell Foam insulation, a Carbon-Based 6-Layer Noise-Dissipation System, a Dielectric-Bias System with Radio Frequency Trap, a silver-plated braid outer shield, and cold-welded hanging-silver terminations over pure red copper RCA plugs. It is AudioQuest's most technically advanced digital coaxial cable and is designed to minimize jitter and RF noise in the S/PDIF signal path to the lowest achievable level. The Coffee is available at Vinyl Sound in Toronto, Canada.

How does the AudioQuest Coffee digital coax compare to the AudioQuest Cinnamon or Carbon digital coax cables?

The AudioQuest Coffee sits above both the Cinnamon and Carbon at the top of the AudioQuest digital coaxial cable range. The Cinnamon uses a Solid 1.25% Silver conductor and a Metal-Layer NDS, while the Carbon advances to a Solid 5% Silver conductor and a Carbon-Based 5-Layer NDS. The Coffee steps to a Solid 10% Silver conductor, a Carbon-Based 6-Layer NDS, and adds the Dielectric-Bias System with RF Trap, which neither the Cinnamon nor the Carbon includes. Compared to competitors such as the Chord Company Sarum T Digital and Nordost Heimdall 2 Digital Coax, the Coffee's DBS-biased insulation and 6-Layer carbon NDS represent a technically differentiated approach to eliminating dielectric and ground-reference distortion at the reference level.

What is the Dielectric-Bias System and why is it included on the Coffee?

The AudioQuest Dielectric-Bias System applies a constant DC voltage field to the cable's insulation using a small battery pack, preventing the insulation from storing and releasing energy from the audio signal. All insulation materials act as dielectrics that absorb signal energy and release it in a frequency-dependent, non-linear manner, causing phase shift and timing errors across the bandwidth of the digital signal. By maintaining a constant electrostatic field, DBS prevents the insulation from participating in this energy exchange and eliminates the associated distortion entirely. The integrated Radio Frequency Trap ensures that the DBS field itself does not introduce RF noise into the signal conductor, preserving the low noise floor the system is designed to achieve.

What makes a 10% silver conductor different from a 5% or 1.25% silver conductor?

The silver content of a conductor directly determines the density and spacing of grain boundaries along its length, with higher silver content producing fewer and farther-spaced grain boundaries. Each grain boundary is a point where the crystal structure of the metal changes, creating a small discontinuity that distorts the signal and introduces high-frequency noise as the signal passes through. A Solid 10% Silver conductor has substantially fewer grain boundaries per unit length than a 5% or 1.25% silver conductor, resulting in lower accumulated conductor distortion and a reduced noise floor on both the signal path and the ground reference. In a digital coaxial application, this translates directly to lower jitter at the DAC and a cleaner clock recovery signal.

What audio components is the AudioQuest Coffee digital coax compatible with?

The AudioQuest Coffee is compatible with any audio component using the S/PDIF coaxial digital audio standard via RCA connectors, including CD transports, CD players, network streamers, digital preamplifiers, AV receivers, and external DACs. At the reference level at which the Coffee is positioned, typical pairings include transports such as the Jay's Audio CDT3 MK3 and Audiolab 9000CDT, connected to DACs such as the Chord DAVE, dCS Bartok, Benchmark DAC3, and Bricasti M1. The Coffee supports all standard S/PDIF sample rates from 44.1kHz to 192kHz.

Where can I buy the AudioQuest Coffee digital coax cable in Toronto or Canada?

The AudioQuest Coffee digital coaxial cable is available at Vinyl Sound, an authorized AudioQuest dealer in Toronto, Canada. Vinyl Sound carries the full AudioQuest digital cable lineup in-store and online, with complete manufacturer warranty support for Canadian customers.

Why does the AudioQuest Coffee use hanging-silver terminations rather than gold plating?

AudioQuest uses hanging-silver terminations on the Coffee rather than gold plating because silver offers lower contact resistance and better conductivity than gold at audio and RF frequencies, making it the more accurate termination material for a reference-level digital cable. The hanging-silver layer is applied directly over pure red copper with no nickel underplating, as nickel has poor conductivity and magnetic properties that introduce distortion at the termination point. The cold-weld joining process eliminates the additional resistance, oxidation risk, and crystalline boundary that solder connections introduce, ensuring the termination itself contributes the minimum possible distortion to the signal path.