45 uF MFD 250 VAC CBB60 50/60 Hz Run Capacitor with Screw - Fits AC Motors, Electric Motors, Water Pumps

45 uF MFD 250 VAC CBB60 50/60 Hz Run Capacitor with Screw - Fits AC Motors, Electric Motors, Water Pumps45 uF MFD Microfarad 250 VAC Volts CBB60 50Hz 60Hz Run Capacitor Key Features Model: CBB60 Capacitance: 45 F MFD (Microfarad) Capacitance Tolerance: 5% Voltage Rating: 250 VAC Frequency: 50Hz 60Hz Operating Temperature Range: 25C to 85C Construction: Metallized polypropylene film resistor Case Shape: Round Safety: Features an internal pressure sensitive interrupter Replaces Cross Reference Part Numbers Universal replacement for any CBB60 type run

45 uF/MFD/Microfarad 250 VAC Volts CBB60 50Hz/60Hz Run Capacitor

Key Features

• Model: CBB60
• Capacitance: 45 µF / MFD (Microfarad)
• Capacitance Tolerance: ±5%
• Voltage Rating: 250 VAC
• Frequency: 50Hz / 60Hz
• Operating Temperature Range: -25°C to 85°C
• Construction: Metallized polypropylene film resistor
• Case Shape: Round
• Safety: Features an internal pressure-sensitive interrupter

Replaces / Cross-Reference Part Numbers

• Universal replacement for any CBB60-type run capacitor with matching specifications.
• Verify that the original capacitor has a capacitance of 45 µF and a voltage rating of 250 VAC or lower (e.g., 220V, 125V). This capacitor can replace units with a higher voltage rating (e.g., 370V, 440V, 450V) provided the capacitance and physical dimensions match.

Compatibility & Fitment

• Designed for single-phase AC motors and various electrical applications.
• Commonly used in:
  • Water pumps
  • Washing machines
  • Air compressors
  • Fans
  • HVAC systems
  • General purpose electric motors
• Physical dimensions should be checked for proper fit in the mounting bracket. A typical size is 104mm height x 50mm diameter.

When to Replace

• Motor hums but fails to start or starts slowly.
• Motor overheats or does not reach full power.
• Visible signs of damage on the existing capacitor, such as bulging, cracking, or leaking fluid.
• Reduced performance from the appliance or equipment.

Installation Tips

• Disconnect all electrical power to the equipment before servicing.
• Safely discharge the existing capacitor by shorting the terminals with an insulated screwdriver or a high-wattage resistor.
• Confirm the new capacitor's capacitance (µF) and voltage (VAC) ratings match the original part's specifications.
• Note the wire connections before removing the old capacitor to ensure correct wiring of the replacement.
• Secure the new capacitor in the mounting bracket to prevent vibration.