SKU: 72381427027

HPA FR450 - IS38 Hybrid Turbo Upgrade | MQB 2.0T

$1016.55 $1129.50
Save 10%
No.2 Bestseller on sm10m.ch >

Pay in installments of $282.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 18 - Aug 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

HPA FR450 - IS38 Hybrid Turbo Upgrade | MQB 2.0TThe HPA IS38 Hybrid Turbo features a custom compressor and turbine wheel design capable of holding up to 450HP* with a flat torque curve from 3800 RPM to redline! Our turbo is a natural upgrade to IS38, IS20, and even IS12 equipped cars where the OEM units lose breath mid way in the RPM range. Coupled with a major redesign of the OEM bearing housing, the HPA IS38 Hybrid turbo is the perfect upgrade for those looking for a significant performance boost

The HPA IS38 Hybrid Turbo features a custom compressor and turbine wheel design capable of holding up to 450HP* with a flat torque curve from 3800 RPM to redline! Our turbo is a natural upgrade to IS38, IS20, and even IS12 equipped cars where the OEM units lose breath mid-way in the RPM range. Coupled with a major redesign of the OEM bearing housing, the HPA IS38 Hybrid turbo is the perfect upgrade for those looking for a significant performance boost with improved long-term reliability.

UNRIVALED RELIABILITY
The IHI IS series turbos have been known to restrict oil flow under sporty driving conditions which can cause premature failure of the bearings resulting in broken turbine shafts. This can lead to catastrophic engine failures due to oil and debris being pushed out into the exhaust system and igniting. The HPA IS38 Hybrid is an insurance against these types of failures.

PRECISION ENGINEERED
HPA has spent 4 years of research and development to completely rethink the bearing housing design. Each turbo requires precision CNC machining of the intake and exhaust housings and include an HPA proprietary mixed-flow turbine wheel, and CNC machined billet compressor wheel. All components are completely upgraded to ensure lubrication for both reliability and peace-of-mind.

OEM QUALITY
Each CHRA is built to meet or exceed the OEM quality specifications, with the individual components of the rotating group balanced on a Schenk Balancer. Once fully assembled, each complete CHRA assembly is balanced with a VSR Balancer ensuring a perfect assembly.

DIRECT BOLT-ON REPLACEMENT
The HPA IS38 Hybrid turbo upgrade has everything you will need for a simple and quick installation including an OEM diverter valve, OEM wastegate actuator, turbo inlet pipe, and silicone hose to adapt to the factory airbox.

 

HPA FR450 IS38 HYBRID FEATURES:

  • Unrivaled reliability
  • Supports up to 450HP*
  • Direct bolt-on replacement including OEM diverter valve and wastegate actuator
  • Turbo inlet pipe and silicone hose to adapt to factory airbox included
  • HPA proprietary mixed-flow turbine wheel
  • HPA proprietary CNC machined billet compressor wheel
  • Precision CNC machined intake and exhaust housings
  • Fully bearing housing and components

*Fuel and tuning dependent – Vehicle: Mk7 Golf R

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 72381427027

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 19 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Charlottesville, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
D
Verified Purchase
Debbie Flynn
Battle Creek, US
★★★★★ 5
Love it it was perfect for what I needed it for. Good quality!
Size: 4 Panel, Color: Black
It like a very dark chocolate brown/black. What I liked most about it is that you just pull it out of the box take the long plastic film off of it and it's ready to go. It has protective feet on the bottom. It's very attractive and it was so easy. It's so nice when you have a product you don't have to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
S
Verified Purchase
Suphisara B.
Bozeman, US
★★★★★ 5
Good quality. Nice design
Size: 4 Panel, Color: Chocolate Brown
Love it. Beautiful and good material. Just a little bit too high for my room.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026
G
Verified Purchase
GrandmaJeanie
Draper, US
★★★★★ 4
Shipped quickly and as described
It was what I expected as functionality, lightweight and easy to move about. I plan to use it in my enclosed patio to obscure weight bench and wts. My only complaint is that the bamboo cover on one edge is not secure. But I will probably use a magic marker to cover the natural back that is showing. I don’t have time to return it as my event is coming soon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 3, 2025
J
Verified Purchase
Jaime Colombani
Massapequa, US
★★★★★ 5
Good product, needs double hinges for versatility.
Size: 6 Panel, Color: Brown
Blocks out all the light, looks good, good color. Only con is that it is not double hinged so it is hard to position the extra panels because I bout 6 panels instead of the 4 I usually get. Good deal, very decent price with the free delivery. Very clean packaging, came in great shape, no smell or odor from the factory.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 9, 2025

recommand products

Autographed/Signed Tyrann Mathieu New Orleans Black Football Jersey JSA COA
149.99
Selkirk Pro S1 Pickleball - 4 Pack
15.00
Tales of the Valiant Metal Dice Set: Silver w/ Light Blue Enamel
49.99
Nordica Wild Belle DC 84 W/ Tp2 Lt 11 Bindings - 2026
375.00
Nordica Speedmachine 3 BOA 110 Ski Boots - 2026
350.00