35+5 uF MFD 370/440 VAC Dual Run Round Capacitor - Fits AC Unit Fan Motor, Heat Pump - Replaces 97F9834 - 2 Pack

35+5 uF MFD 370/440 VAC Dual Run Round Capacitor - Fits AC Unit Fan Motor, Heat Pump - Replaces 97F9834 - 2 Pack35+5 MFD uF 370 VAC or 440 Volt Dual Run Round Capacitor Key Features Capacitance: 35 5 Microfarad (MFD) Tolerance: 5% Voltage Rating: 370V or 440V AC (dual rated) Frequency: 50 60 Hz Shape: Round Case Material: Aluminum Terminals: 1 4 inch male quick connect (3 terminals: C, HERM, F) Operating Temperature: 40C to +70C ( 40F to +158F) Dimensions: 2 in. diameter x 4. 75 in. height Replaces Cross Reference Part Numbers Replaces any round dual run

35+5 MFD uF 370 VAC or 440 Volt Dual Run Round Capacitor

Key Features

• Capacitance: 35/5 Microfarad (MFD)
• Tolerance: ±5%
• Voltage Rating: 370V or 440V AC (dual rated)
• Frequency: 50/60 Hz
• Shape: Round
• Case Material: Aluminum
• Terminals: 1/4 inch male quick-connect (3 terminals: C, HERM, F)
• Operating Temperature: -40°C to +70°C (-40°F to +158°F)
• Dimensions: 2 in. diameter x 4.75 in. height

Replaces / Cross-Reference Part Numbers

• Replaces any round dual run capacitor with matching 35/5 MFD and 370V or 440V specifications.
• Direct replacement for capacitors labeled 35+5 MFD, 35/5 µF, or similar variations.
• Always verify capacitance (MFD), voltage (V), and physical dimensions before ordering.

Compatibility & Fitment

• Used in air conditioning units, heat pumps, condenser fan motors, and compressors.
• Combines two capacitors into one unit to power a compressor motor (HERM) and a fan motor (F).
• Compatible with units from various manufacturers that require a capacitor with matching specifications.

When to Replace

• Compressor or fan motor hums but does not start.
• AC unit runs intermittently or fails to start.
• Air conditioner blows warm air.
• Visible signs of failure on the existing capacitor, such as a bulging or swollen top, leaking oil, or heavy corrosion.

Installation Tips

• WARNING: Disconnect all electrical power to the HVAC unit before beginning installation.
• Capacitors store an electrical charge. Safely discharge the old capacitor by shorting the terminals with an insulated screwdriver.
• Note or photograph the wire placement on the C (Common), HERM (Hermetic/Compressor), and F (Fan) terminals before disconnecting.
• Connect the wires to the corresponding terminals on the new capacitor.
• Secure the new capacitor using the existing mounting strap or bracket.