SKU: 20788236482

Chinese Vernisboom (Koelreuteria paniculata)

Sale price$139.50 Regular price$155.00
Save 10%

Pay in installments of $38.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 27 - Aug 1

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Chinese Vernisboom (Koelreuteria paniculata)Onder de categorie bloesembomen is de Chinese Vernisboom wel een kleine koning. Naast zijn prachtige bloesem krijgt deze als kers op de taart namelijk ook nog zogenaamde ''blaasvruchten''. Deze boom wordt daarom ook wel de blazenboom genoemd in de volksmond. De Latijnse naam is Koelreuteria Paniculata. Maar aangezien wij al moeite hebben met de naam goed spellen, zullen we deze naam niet hel vaak nog gebruiken. Maar even terug naar de Chinese

Onder de categorie bloesembomen is de Chinese Vernisboom wel een kleine koning. Naast zijn prachtige bloesem krijgt deze als kers op de taart namelijk ook nog zogenaamde ''blaasvruchten''. Deze boom wordt daarom ook wel de blazenboom genoemd in de volksmond. De Latijnse naam is Koelreuteria Paniculata. Maar aangezien wij al moeite hebben met de naam goed spellen, zullen we deze naam niet hel vaak nog gebruiken. Maar even terug naar de Chinese Vernisboom. Deze boom past namelijk niet alleen mooi in de Oosterse tuinen, maar ook in een gewone doorsnee tuin. Want laten we even eerlijk zijn, gele bloesem in de zomer, waar staat dit niet goed. Wellicht ook één van de leuke dingen aan de Chinese Vernisboom is, dat deze bloeit in de zomer in plaats van in het voorjaar. Na deze bloei gebeurt er ook nog iets bijzonders. Er komen blaasvruchten van ongeveer 4 centimeter aan de boom te hangen die eruit zien als ''een opgeblazen blad''.

De Chinese Vernisboom past gemakkelijk in een doorsnee tuin omdat deze op 5 meter hoogte kan blijven met snoeien. Ook is het snoeien van dit soort erg gemakkelijk. De Blaasboom staat er verder ook nog om bekend dat deze een grove takgroei maar fijne vertakking heeft en een ruwe stam. Ook niet te vergeten, de herfstkleur in de herfst is prachtig. Een andere boom met gele bloesem is de gouden regen, deze bloeit ook uitbundig aan gele bloemen.

Chinese Vernisboom planten

Wilt u weten hoe u uw Chinese Vernisboom kunt planten? Weliswaar hebben we een handige aanplant handleiding gemaakt voor het aanplanten. Hier staat uitgelegd hoe om te gaan wanneer de boom is geleverd tot en met het aanplanten. Volg deze stappen goed op want dit is de basis voor de juiste groei. Vind u het toch lastig de Chinese vernisboom zelf te planten, neem dan even Contact met ons op.

Wat u moet weten over de Chinese Vernisboom

Voordat u een Chinese Vernisboom gaat kopen is het natuurlijk handig om het één en ander te weten over de boom. Uiteraard hebben we al wat informatie verteld, maar dit was pure enthousiasme over die boom. U weet namelijk nog niet wat deze boom nodig heeft, waar hij moet staan, wanneer u hem moet snoeien, etc. Maar dat gaat goed komen. Hieronder geven we u een lijstje met feitjes, zodat u kunt kijken of de Chinese Vernisboom bij u past:

  1. De Chinese Vernisboom past zowel in de oosterse tuinen, Nederlandse tuinen en de middel/grote tuinen;
  2. De Kroon van deze ''blaasboom'' is alles behalve symmetrisch. Deze groeit lekker grillig;
  3. Het blad heeft een bijzondere constructie en bestaat uit meerdere ovale geveerde bladeren van ongeveer 30 cm;
  4. In de zomer krijgt deze bloesemboom zijn gele bloesem;
  5. Na de bloesemperiode krijgt de Chinese Vernisboom zijn extra cadeautje, de blaasvruchten;
  6. Deze boom is niet giftig voor mensen en dieren;
  7. De Blaasboom staat het liefste in de zon, daar staat deze namelijk ook van oorsprong in Noord-China;
  8. Deze boom gedijt overigens ook goed op droge grond, maar een beetje vocht kan ook;
  9. Een leuk feitje nog, dit is ook een drachtboom voor bijen, dus indien u van vlinders houd, jack pot!
  10. De Chinese Vernisboom is niet groenblijvend of bladhoudend;

Hoe snoei je deze boom?

Het is niet de bedoeling dat u (zomaar) de Chinese Vernisboom snoeit! Nu we dit dikgedrukt hebben, hopen we natuurlijk dat u dit leest, maar het snoeien van deze boom kan fataal zijn. Doe het snoeien van deze boom daarom ook echt niet vaak en alleen om zijn lengte een klein beetje beperkt te houden. Het merg van de boom kan hier namelijk niet goed tegen en dan kan de boom er dood aan gaan. Wanneer u snoeit, doe dit dan in het voorjaar en dek de wond (snoei wond) met wondbalsem voor bomen. Dit klinkt wellicht heel overdreven, maar anders kan er koraalzwam toeslaan. Houdt natuurlijk ook de algehele regels van het snoeien van bomen in de gaten, zoals: ''Snoei niet meer dan 30% van de takken af''.

Suggestie

Wilt u liever net iets anders dan een Chinese vernisboom kopen? Dat kan, onderaan deze pagina vindt u ''Gerelateerde producten''. Die laten producten zien waarbij de belangrijkste eigenschappen matchen. Maar waarbij de details kunnen variëren. In het schema hiernaast kunt u zien wat de eigenschappen van deze boom is. Wanneer u zoekt naar een iets kleinere boom die wel wat breder is, dan raden we nadrukkelijk de Koelreuteria paniculata meerstammig aan.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 20788236482

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 16 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
Verified Purchase
Nancy
Carnegie, US
★★★★★ 5
Real steel pipe
Size: O Desk Unfinished 3/4-in and 1/2-in
This pipe table leg set was great. It's real steel pipe like from the hardware store. It does have a layer of oil on it so that must be stripped using dawn or some other degreaser before handleing and painting. It is also offset in the middle bar so if you use it as a desk you get more leg clearance. I used it as a table base so I bought matching middle braces to set the middle support in the center of the table. Once together it looks great. I highly recommend getting this if you want a good quality pipe base.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2023
K
Verified Purchase
Kim R-A
Charlottesville, US
★★★★★ 5
Price / Quality - Office Desk - Perfect
Size: H Desk Unfinished 3/4-in and 1/2-in
Purchased two sets to create a custom L shaped desk for the office. Placed a pine stained top. Perfect to handle a monitor, multiple laptops, normal office equipment. Extra benefit is the cross piece at the bottom as a foot rest. Very sturdy while sitting on carpet. Compared to normal pipe material purchased in large box store -- could not have asked for a better product for the price. Looking at other products for additional projects for around the house for the product and vendor. - Highly Recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2021
J
Verified Purchase
Joseph E. Brackman
Dallas, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
Boise, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
C
Verified Purchase
Colauhu
Louisville, US
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021

recommand products