Friendly Plastic Clay DIY Polymorph InstaMorph Plastimake Thermoplastic (100g)

Friendly Plastic Clay DIY Polymorph InstaMorph Plastimake Thermoplastic (100g)Package Include: 1 x 100g Use polymorph: 1. Simply heat the pellets in water to over 70 90C. 2. Leave the pellets to melt in the water until they turn transparent. 3. Remove the pellets from the water and mould by hand (add color at this stage if required) 4. Put the finished item in cool water and until it's white and hard 5. Re heat if further molding is required. Safety Warning: 1. Never heat polymorph over 150C as this will damage the polymer. 2.

Package Include: 1 x 100g

Use polymorph:
1. Simply heat the pellets in water to over 70-90C.
2. Leave the pellets to melt in the water until they turn transparent.
3. Remove the pellets from the water and mould by hand (add color at this stage if required)
4. Put the finished item in cool water and until it's white and hard
5. Re-heat if further molding is required.

Safety Warning:
1. Never heat polymorph over 150C as this will damage the polymer.
2. Wait around 5 min after it cools down before you reheat and reshape it again.
3. Do not eat. Contact doctor if swallowed.
4. Product should be ok to use for children 10+
5. Product may become hot.