SKU: 94629120426

Capristo Mercedes AMG CLA45 (C118) - Valved Exhaust (CES3)

$2160.00 $2400.00
Save 10%
No.2 Bestseller on sm10m.ch >

Pay in installments of $600.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 12 - Aug 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Capristo Mercedes AMG CLA45 (C118) - Valved Exhaust (CES3)The iconic CAPRISTO Valved Exhaust System offers the best of both worlds through its capability to produce an aggressive exhaust note under acceleration, and a more subdued sound for city driving. This feature is possible using vacuum actuated valve flaps that open and close depending on driving conditions and input from the driver. At lower engine speeds and during cruise operation the valves are closed and produce a deeper exhaust note. At wide open

The iconic CAPRISTO Valved Exhaust System offers the best of both worlds through its capability to produce an aggressive exhaust note under acceleration, and a more subdued sound for city driving.

This feature is possible using vacuum-actuated valve flaps that open and close depending on driving conditions and input from the driver. At lower engine speeds and during cruise operation the valves are closed and produce a deeper exhaust note. At wide-open throttle, the valves open releasing the full symphony of the engine.

The exhaust valves are backpressure-controlled and user programmable via the included CES-3 Control Module. The programmable control unit provides 3 modes operated via a remote key fob:

Cruise Exhaust valves open at higher RPMs

Sport Exhaust valves open at lower RPMs and hard acceleration

Open Exhaust Valves Remain Open

Both the Cruise and Sport mode can be individually programmed for specific backpressure allowances to determine when the exhaust valves open. This allows precise control of the exhaust based on the drivers personal tastes and tolerance.

CAPRISTO Exhaust systems are engineered and manufactured utilizing advanced 3D Laser-Scanning, CAD Design, Digital prototyping, and CNC-bending/milling at our factory in Germany. Each system is made of high-grade T309 (1.4828) Stainless Steel and hand polished to a mirror finish. After extensive research, this specific alloy was chosen for its sonic resonance properties, low weight, and durability which are close to the properties of Inconel (used in F1).

Original Exhaust system with closed flaps : 108 & with open flaps: 112.6 dba
Capristo Exhaust system and downpipe (200 cpsi) with open flaps: 119 dba

IMPORTANT

*The exhaust system is designed to be installed directly into existing OEM mounting points*

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 94629120426

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tharin
Los Angeles, US
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ. Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that. Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
H
Verified Purchase
Harvey
Pawtucket, US
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
L
Verified Purchase
Lyrah
Whiting, US
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
J
Verified Purchase
Jak
Lake Worth, US
★★★★★ 5
Cost effective
Style: 8.7 sqft（8 pcs）, Material Type: Aluminum 197 mil
Nice, cost effective material. It stuck nicely to the door and was fairly easy to use. The grid marks on the back made it easy to cut. I would not rank it up with other materials in sound and heat isolation, but it did cut down the overall vibrations on the door panels and I did not feel heat immediately from the floor area as i did with bare metal. If you are working with a budget and want modest improvement, this material will work well over most stock materials.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 7, 2026
C
Verified Purchase
Carter Davis
Alexandria, US
★★★★★ 5
Good value and sticks well
Style: 8.7 sqft（8 pcs）, Material Type: Aluminum 197 mil, Style: 8.7 sqft（8 pcs）, Material Type: Aluminum 197 mil
For $14 for 8.7 square feet, this was more than enough to cover the important parts of the trunk of my 944. You DON'T need a roller to apply this, just strong hands and a well prepped surface. I vacuumed, lightly washed, then used 90% alcohol to clean the surface before applying. I could have used more and covered every inch, but there is diminishing returns in doing so (especially on a budget, or with a lower wattage sound system in my opinion). If this stuck as well as it did for me in a 45° garage, then it should stick just fine for you too. I will say, it is a little cheap feeling, but for the price I can't complain. There is an audible difference when knocking on the panels this material is applied to. I'm not a professional though, and if you're an audiophile, there are better options (but prepare to empty your wallet). Not sure I would do an entire vehicle with this material, but it is a great supplement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 15, 2026

recommand products

MELON BLANC VENDANGE NOCTURNE VIN DE FRANCE PIERRE-HENRI GADAIS
14.89
Sanitaire 7.0 Amp Motor Assembly with Fan # 15942-1, 53361-1 OEM
59.99
Upgraded Replacement Dirty Water Tank & Separator Float Stack for Bissell Carpet Cleaners 2694 2513 Series & more - Replaces OEM # 1618846
24.99
Broan S99080666 Motor for NS6500 and WA6500 Range Hood Series
67.00
Clean Obsessed Replacement Filter for Eureka Mighty Mite Canisters Models 3670, 3685, C3691, SC3683, S3686, 36595 & 3681 - HF-8
11.95