Pay in installments of $789.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 13 - Sep 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
HALTECH Elite 2500 T + GM GEN IV LSx (LS2/LS3 etc) non DBW Terminated Harness Kit Injector Connector: Bosch EV1Suits: Common US style Delco Bosch GM alternator connector. Pre wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. Includes: Elite 2500 T ECU with DBW, Advanced Torque Management and Race Functions, engine harness with fuse block, firewall grommet, USB programming cable and USB Software Key. Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if
Suits: Common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only.
Includes: Elite 2500 T ECU with DBW, Advanced Torque Management and Race Functions, engine harness with fuse block, firewall grommet, USB programming cable and USB Software Key.
Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
OVERVIEW
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
- efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
- quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle.
- guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU OVERVIEW
Haltech's Elite 2500 T takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 T provides engine calibrators the tools they need to get the job done right. Alongside this ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
- Supports 1 to 12 Cylinder engines
- 2 to 4 Rotor engines
- Normally aspirated or forced induction
- Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
- Staged, Sequential, semi sequential, batch or multipoint injection patterns
- Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
- Connect to a wide range of display dashes and expansion devices via CAN.
- Waterproof Case (With Pocket Cover Fitted)
- 8 x Fuel Injection Outputs
- 8 x Ignition Outputs
- 12 x Digital Outputs
- 10 x Analogue Voltage Inputs
- 4 x Synchronised Pulsed Inputs
- 4 x Dedicated inputs (Dual Knock, ignition Switch & onboard MAP Sensor)
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB Laptop communication (Windows)
- ESP Calibration Software - Intuitive and easy to use
- harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
- programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
FEATURES
ECU FEATURES
- Drive by Wire Throttle Control (DBW) - Requires (2) user defined outputs & (4) user defined inputs
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time
- Flex Fuel Function (Direct sensor input) - Tune your engines boost, fuel and ignition by ethanol content
- Flexible tuning setup for Petrol (Gasoline), LPG, Methanol and Ethanol allows you to simply select your fuel type
- Closed Loop 02 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit)
- Dual Channel Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection
- Variable cam control - Independently control up to 4 camshafts - Requires a minimum of 1 user defined input & output per variable cam
- Closed Loop Idle Speed Control with learning for consistent idle stability Requires 1 or 2 user defined outputs (BAC type) or 4 user defined outputs (Stepper motor type)
- Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D)
- On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory
- Laptop data logging -Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics
- Dual CAN Bus communication for Haltech Dashes and expansion devices, Supported OEM CAN & OBDII (view live engine data & set and clear diagnostic trouble codes)
- Injection Stages 1 - 4 with individual injector flow rates per injector
- 8 Injector drivers for 2 sequential stages on 4 cylinder & 3 rotor engines and up to 4 sequential stages on 2 rotor engines
- Anti-Lag/Rotational idle - for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions
- Rolling Anti-Lag - lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting
- Launch Control - Control your engines power delivery, RPM & boost for consistent performance at the start line
- Traction Control - Control your engines power output via mappable front vs rear axle or individual wheel speed slip.
ADVANCED TUNING
- Tuning Table Resolution up to 32 x 32 x 8
- Limitless tuning flexibility -Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections
- tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height or any channel for ultimate flexibility - Dual mapping is a thing of the past.
- Per Cylinder Tuning Correction - 3D
- Wideband O2 - Connect up to 9 Channels via CAN expansion devices
- Thermocouples/EGT (Exhaust Gas Temperature) - Connect up to 12 Channels via external CAN expansion devices
- Engine Protection - Set advanced multi-level limits for sensors and protect your engine against common causes of failure
RACE FUNCTIONS
- Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays & banked control options.
- fuel and ignition corrections for all stages.
- Boost Control -Intelligent 4D Closed loop, with learning, flexible user definable axis and 14 fully user definable boost target and duty cycle corrections.
- modes - example boost by gear, road speed, race timer, shock travel, ride height etc.
- Sequential turbo control
- CO2 Boost control, wastegate pressure & position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer
- Flat shift - Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
- Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery
- Timer Functions - Use the combination of the race timer and 5 additional programmable timers for time based control of multiple engine parameters, power delivery and other user definable functions
- Trans brake function allows smooth and consistent control of start line staging (Bump or Creep)
- Advanced Torque Management - A fully integrated driveshaft RPM target race function that provides the ultimate control and consistency for the serious drag racer, eliminating the need for costly external controllers
RESOURCES
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 16 reviews
Sort
Product Reviews
★★★★★ 4
Very nice fleeces
This is a clean, soft, well groomed fleece intended for use on a 6 foot long sofa, so bought 2. They moved too much as a result of shifting bodies on the leather couch, so will get a longer version, sewn bottom to bottom, and used each of these fleeces on both armrests, instead.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 15, 2025
★★★★★ 5
Excellent Product!!! Will purchase again!
Size: 2' x 3' (Natural), Color: Wolf Tipped
Instead of ordering a cover for reclining loveseats, I chose to drape one of these over the headrest on either end of our loveseat. Not only do they protect the leather, they also help to elevate our decor. The rugs were received in a very timely manner. They are super soft, & warming as we move into the winter months. We've had family & friends comment on how great they look. 2 of them have already ordered, & added them to their sofa/loveseat/recliner decor. Have an issue of them slipping, add some velcro in between the crook of the cushion & the back of the furniture piece. It doesn't show & will help to keep the rug in place; if your busy body.!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 10, 2025
★★★★★ 5
Perfect for sensory sensitive kids and for the pure beauty of it
Size: 2' x 6' (Natural), Color: Natural (Yellow Undertones), Size: 2' x 6' (Natural), Color: Natural (Yellow Undertones)
After speaking over the phone with the seller, I was confident in this purchase for my SPD son. They do not use harsh chemicals or dyes in the process. It is from New Zealand and the only use in Vietnam is for shipping. My son hasn't been diagnosed yet for Autism but he is in the process. He is super sensitive to all things sensory and Amazon feedback isn't the place to give specific details on his condition but I will write that when he fist touched it- which was willingly- he smiled and asked to sleep on it. When he laid down on it and I covered him- he was calm and smiling. In the pic I provided he is calm and holding his door (his obsession is doors and windows). He even set his door down to hold the fur. For other mommies and papas with spd/autistic kids you know that willingly touching a new fabric and setting down an obsessive item is huge and super encouraging!
I am so grateful to have such a quality item that is affordable for my special needs son. His older sister received one as well as is now pretending to be a sheep. Fun for everyone!
The ONLY negative is that the brand/info sticker on the pelt was a pain to get off and pulled some of the felt - not damaging it but blemishing the unity -but if the skin is down it will not be noticeable.
A super fun detail is that all of the fur is combed out but there were a few strands that were wavy and had a slight curl- I LOVED that.
There was no odor at all which is great! I expected an animal smell which is better than chlorine or dioxin which is what competitors use in their process.
There is no noticeable seam in the middle on the top where the two pelts are gathered.
I am soooo satisfied!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 13, 2016
★★★★★ 5
Exactly as described and what I needed.
Size: 2' x 6' (Natural), Color: Wolf Tipped
I have a bad back along with other medical problems. I bought this for padding in my wheelchair. Very thick, soft, flexible, everything I needed. No smell and very little shedding even initially. Arrived quickly and well packaged.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 24, 2026
★★★★★ 5
Works for Sherpa, and heavy rugs
This worked on my 2 Sherpa jackets and a heavy furred rug. I tested it on my old Sherpa jacket that had the furs pretty much flat after years. I used this on it which took about 3 hrs to do and it feels brand new. I was so shocked that I used it on my old rug that had about an inch length in fur. The fur was all tangled so it had little stalks sticking out. After about 6-7 hrs, the rug was straight up rejuvenated felt brand new.
I’m was very pleased with this product. Now, the real question is it worth it? I’ll just tell my opinion from my experience and let you decide for yourself. The product itself feels sturdy with a wooden base. It’s around 6 and a half inches so not very big. (This is one of the reasons why the rug too so long.)The metal brushed was surprisingly durable. I was applying a good amount of force when combing my rug and there were no bending.
For 14 dollars and some elbow grease, I got two new jackets and a rug. The brush didn’t break so I can just keep using this to maintain. In my books, I got my moneys worth.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 26, 2024