2" Hitch Receiver Shackle Adapter

2" Hitch Receiver Shackle Adapter2" Hitch Receiver Shackle Adapter The Custom Splice 2" Receiver Shackle Adapter made from 100% Solid Billet 6061 Aluminum. Great to have anytime you wheel in mud, rocks or snow. No need to modify for a rear Shackle Tow point. This hitch converter is rated for 9,500 lb working load. 50,000 lb Ultimate failure rating. Weighing in at 1. 7 lbs. As always, 100% Made in America. Add our US Made 3 4" (7 8" pin) Shackle to insure you're using a quality

2" Hitch Receiver Shackle Adapter

The Custom Splice 2" Receiver Shackle Adapter made from 100% Solid Billet 6061 Aluminum. Great to have anytime you wheel in mud, rocks or snow. No need to modify for a rear Shackle/Tow point. This hitch converter is rated for 9,500 lb working load. 50,000 lb Ultimate failure rating. Weighing in at 1.7 lbs. As always, 100% Made in America. Add our US Made 3/4" (7/8" pin) Shackle to insure you're using a quality product. Our 3/8" Soft Shackle is another great addition that will work perfectly when wanting to connect to your Hitch Adapter. We designed this mount with a 3/4" shackle in mind to insure the best quality fit and function.

Machined in the US, our Hitch Adapters are a stronger replacement for your trailer ball when using as an additional recovery point on your vehicle using a strap or yanker rope. Straps have a tendency to pop off balls without an adapter, giving you a less secure attachment point.

Custom Splice Hitch Adapter Benefits:

• Made with 6061 aircraft grade aluminum
• Designed for use with rope or steel shackles
• Stronger and lighter than commonly available cast steel adapters
• Solid aluminum—not welded (welds can reduce strength and put stress on recovery point)

The size of Hitch Adapter needed is based on the hitch already installed on your vehicle. If you have any questions please contact us at [email protected] or by calling 785.856.1844.