Pay in installments of $61.83 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 14 - Aug 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
iFlight Nazgul Evoque F6 V2 HD Digital FPV Quadcopter (DJI O3)Available in two configurations: F6X (Squashed X) F6D (DeadCat) Out of the box, the Evoque HD V2 will bind with your DJI FPV Remote Controller V2. The flight controller and drone does allow you to connect your own third party receiver such as ELRS, Frsky, or Crossfire. This drone is compatible with the DJI FPV goggles V2 or DJI Goggles 2 . Features 6 Inch Motors and Propellers for Longer Flight Times The Evoque F6 is slightly larger, allowing you to
Available in two configurations:
- F6X (Squashed X)
- F6D (DeadCat)
Out of the box, the Evoque HD V2 will bind with your DJI FPV Remote Controller V2. The flight controller and drone does allow you to connect your own third-party receiver such as ELRS, Frsky, or Crossfire. This drone is compatible with the DJI FPV goggles V2 or DJI Goggles 2 .
Features
6 Inch Motors and Propellers for Longer Flight Times
The Evoque F6 is slightly larger, allowing you to use larger motors, props and batteries to give you longer flight times compared to the Nazgul F5 .
Integrated GPS Module
Smooth and Powerful XING2 Motors
iFlight's latest upgrade to their best-selling XING motors! The bell is made from a single piece of metal, the titanium shaft is reinforced with a strong metal bell joint, and the bell is made of 7075 aluminum, which is crash resistant. In addition to the smooth and long-lasting Japanese NSK bearings, the center slotted N52H curved arc magnets are protected by our XING O-ring bushing.
Latest Nazgul Frame for Maximum Protection
Getting your electronics covered in dirt and wet grass every time you crash is the old way of going. With our latest frame, you it is much harder to accumulate dirt and grass on your flight controller and ESC, making it less likely for your flight controller and ESC to fail or short out. Airflow that keeps your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and TPU protective parts that protect your components from all angles while giving your FPV quadcopter drone some style.
DJI O3 HD Air Unit Low-Latency digital transmission
Enjoy crisp and smooth real-time views in your goggles even in situations where interference is present, with a transmission range of up to 10 kilometers as claimed by DJI
4K Stabilised Video with 155° Ultra-Wide Angle
As well as delivering high-end stabilised imaging performance, the O3 onboard recorded video produces stunning visuals that will keep your audience engaged throughout the entire flight video.
Secured Battery Plug with Anti-Spark Filter
A spark can occur when you plug in a battery as the high battery current rushes into the low ESR capacitor, causing the ESC capacitor to fill up with enough capacitance to cause the spark at the connector. A protective circuit has been added to the XT60 connectors in your Nazgul V2 drone in order to protect them from rapid voltage or current spikes and extend the lifespan of your electronics.
Specially Designed Heatsink for DJI O3 HD Air Unit
The DJI O3 video transmitter has been upgraded to provide improved cooling performance via iFlights heatsync. A custom CNC heatsink has been added to ensure it dissipates heat efficiently at higher power levels.
Important
All iFlight BNFs are tested before shipment to guarantee highest quality.
If you still encounter a problem after receiving your drone, please immediately contact iFlight customer support at www.iflightrc.freshdesk.com.
Specifications
Product Name: Evoque F6 V2
- FC: BLITZ Mini F722 Flight Controller
- ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC
- Video Transmission: DJI O3 Air Unit
- Frame wheelbase: 255mm (Squashed X) / 262 mm (DeadCat)
- Motor: XING2 2506 motors
- Prop: 6 inch propellers
- Weight：475grams
- Takeoff Weight：Approx. 680 g
- Dimensions (L×W×H)：180×180×80 mm
- Diagonal Distance：120 mm
- Max Speed：135 Km/H (Manual Mode)
- Maximum Takeoff Altitude：5000 m
- Max Hover Time：Approx. 8 mins
- Max Flight Distance：5 km
- Max Wind Speed Resistance：10.7 m/s (Level 5)
- Operating Temperature Range：-10° to 40° C (14° to 104° F)
- Antennas：Dual Antennas
- GNSS Module Pre Installed：GPS + Galileo
Product Name：DJI O3 Air Unit
- Communication Frequency：2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
- Communication Bandwidth： Max 40 MHz
- Live View Quality and Latency
- With DJI FPV Goggles V2:
- 810p/120fps Video Transmission Quality: The video transmission latency is lower than 28 ms.
- 810p/60fps Video Transmission Quality: The video transmission latency is lower than 40 ms.
- With DJI Goggles 2:
- 1080p/100fps Video Transmission Quality: The video transmission latency is as low as 30 ms.
- 1080p/60fps Video Transmission Quality: The video transmission latency is as low as 40 ms.
- Max Video Transmission Bitrate：50 Mbps
- Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
- Audio Transmission: N/A
Included
- 1 x Evoque F6 6S HD BNF
- 2 x Antennas
- 1 x Battery pad
- 2 x propeller (Pairs)
- 2 x Battery strap
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy