Pay in installments of $27.24 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 16 - Aug 21
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Mishimoto MMFF-RPHF-S010 High-Flow Fuel Filter Replacement Inserts, 200mm, 10-Micron Stainless SteelBuilding a high performance vehicle is an expensive endeavor that requires attention to every little detail. When horsepower is nearing the 4 digit mark, one oversight can cause catastrophic failure. Each vehicle system needs to be running at peak performance, but no other system can cause thousands of dollars of damage faster than fuel. An undersized or clogged fuel injector, pump, or filter can cause too little fuel flow to the engine, resulting in
Building a high-performance vehicle is an expensive endeavor that requires attention to every little detail. When horsepower is nearing the 4-digit mark, one oversight can cause catastrophic failure. Each vehicle system needs to be running at peak performance, but no other system can cause thousands of dollars of damage faster than fuel. An undersized or clogged fuel injector, pump, or filter can cause too little fuel flow to the engine, resulting in not only a loss of power, but also excessive heat. Even short periods of high cylinder temps can lead to detonation, melted pistons, or a seized engine and thousands of dollars in repairs. The best way to prevent fueling issues is to install the best quality components from tank to injector, and our Mishimoto high-performance fuel filters fit the bill. These fuel filters feature an easy to replace cartridge-style filter in your choice of cellulose paper for petroleum-based fuels or welded stainless-steel for use with alcohol-based fuels. Both our cellulose and stainless-steel filters are available with a 10-micron rating for use between the pump and fuel rail, while the stainless-steel inserts are also available with a 100-micron rating for pre-pump filtering. These inserts include high-quality Viton O-rings and are rated to withstand up to 116 PSI for reliable performance on even the most demanding vehicles. Like all Mishimoto products, these high-performance fuel filter inserts are backed by our Mishimoto Lifetime Warranty for a lifetime of performance.Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 28 reviews
Sort
Product Reviews
★★★★★ 5
Great lighting solution for bookshelves
Color: 3000K Warm, Size: 2Roll x 16.4ft, Color: 3000K Warm, Size: 2Roll x 16.4ft
This turned out to be the best solution for lighting up my bookshelves. I like the quality of the product and the brightness of the lights.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
★★★★★ 5
Polarity
Color: 6500K White, Size: 1Roll x 16.4ft, Color: 6500K White, Size: 1Roll x 16.4ft
I've been looking into various kits and components but this one seemed to fit my needs perfectly - all components included and the flexibility to cut strips (up to 6) to the lengths I needed. Its also very thin and needs no other mounting hardware, channels, diffusers, screws, etc.
No instructions - but everything only fits together one way except which end of the LED strip to connect to (polarity). For my reel, it was towards the center of the reel and not the freed end - which meant I had to cut a piece off and connect the end that was just cut. Insert the cut end into the connect after peeling off a bit of the blue tape. You can also peel off a little bit of the white tape beneath that to expose the copper contacts - but the connector contacts can pierce that layer if you don't want to peel off the white layer also. (Don't peel it all off, just enough to to fit into the connector.) Insert the end, press down the hinged part until it clicks or is otherwise all the way clamped - don't need tools, just your fingers squeezing it is enough. Test the assembly by plugging it into the power supply. You can also connect the remote - a blue LED on the power supply tells you whether its on or off.
Once I figured out which end to connect to, everything was quite straightforward. I installed my 6 strips in my small pantry - one for each shelf - and routed all the wires to one side, mostly hidden. I mounted the remote on the pantry door - it can sense through the door - which is not very thick - as well as just tapping it once the door is open. The remote can be touchless - just wave your hand near it - but it seems to also sense tapping from some objects. Holding down on the remote activates dimming - it will cycle through brightness and stop when you release.
Other than that, its as simple as I had hoped and took me about an hour to install (I expect my next install will be 30 mins). I am planning to order more kits for other closets, kitchen, etc.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 29, 2024
★★★★★ 5
UPDATED: Replacement works great
Color: 3000K Warm, Size: 1Roll x 16.4ft
FINAL UPDATE: Seller shipped new power unit and it works great now. The lights are really great and super easy to cut to size and use.
UPDATE 1: Seller got in touch and is sending replacement power unit. Will update again once it arrives.
I do really like the look of these and they did wonders for a dark park of my closet that has built-ins.
ORIGINAL: Lights stopped working after about 6 weeks (beyond the 30 day return policy). Seems like the control unit died. Haven’t found any feasible way to contact seller or manufacturer. Will update review if anything changes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 26, 2025
★★★★★ 4
Light it up!
Color: 3000K Warm, Size: 2Roll x 16.4ft, Color: 3000K Warm, Size: 2Roll x 16.4ft
I am very happy with these. They are easy to use. The only reason I am not giving a five star review is because the instructions and assembly weren’t the easiest. At first we could not get them to work. After looking through the reviews, one man told us that the -\+ were backwards and we tried what he suggested and they worked. I do suggest that because there are two light reels there should be two connecter boxes as well. We had to purchase two packages. Overall, We are satisfied with our purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026
★★★★★ 1
Quality just isn’t there
Color: 3000K Warm, Size: 2Roll x 16.4ft
Was very excited to receive this product because I had difficulty lighting op these LED strip lights, this looks like a package that had everything that I needed.
First off, the strip lights themselves are very thin with wise and would look funny on my project, the adhesive backing did not stick at all once removed
The touch sensor works great for about 10 minutes and then completely died, overall not impressed with the quality of this product, sending back
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 4, 2026