JAC2512-PC - Schauer 12V, 25A Aircraft Power Supply & Fully Automatic Battery Charger with Piper Plug and Battery Clips

JAC2512-PC - Schauer 12V, 25A Aircraft Power Supply & Fully Automatic Battery Charger with Piper Plug and Battery ClipsModel JAC2512 PC (0891 121PC) Schauer JAC2512 PC 12V, 25A Aircraft Power Supply & Intelligent Electronic Charger with Piper Single Pin Plug and Battery Clips Avoid draining the battery in your aircraft while you conduct ground avionics training, familiarization, maintenance or download updates. The AC cord goes to a standard wall outlet, and the Piper style plug goes to the external power outlet on your flying machine, providing ground power and

Schauer JAC2512-PC - 12V, 25A Aircraft Power Supply & Intelligent Electronic Charger with Piper Single-Pin Plug and Battery Clips

Avoid draining the battery in your aircraft while you conduct ground avionics training, familiarization, maintenance or download updates. The AC cord goes to a standard wall outlet, and the Piper style plug goes to the external power outlet on your flying machine, providing ground power and eliminating worries about a dead battery while you've got all the switches on. When you're done, swap the plug for the included battery clips and hook it up to your battery - it also functions as a Fully Automatic Electronic Battery Charger with Float/Maintenance Mode. This charger may be left connected for extended periods without damaging your battery. The JAC2512-PC is for aircraft with 12V (14V) electrical systems, and which use a Piper style single-pin aircraft plug.

The Schauer JAC2512-PC is both a 12V Power Supply and a Fully Automatic, 3-Stage Electronic Charger with a gray SB50 connector on the 96" DC Lead. Unlike the standard JAC2512, this unit will supply 12V DC output without any voltage sensed at the DC leads.

 
The JAC2512-PC will charge any type lead acid battery, including conventional flooded cell, maintenance free, deep cycle, gelled-electrolyte, or AGM valve regulated batteries. The 3-Stage Charge Control provides Modified Constant Current Charge to a constant finishing voltage, then to a float/standby voltage to maintain the battery in a fully charged condition.

The JAC2512-PC features a heavy-duty aluminum case with mounting flanges. Multi-Voltage AC Input via 115V/230V selection switch on base. Supplied with a 72" grounded North America AC input cord equipped with IEC C13 plug for connection at the charger. For international use, simply replace with an AC cord equipped with a locality-appropriate mains power plug and IEC C13 connector.

Features

- MAY BE USED AS A 12V DC POWER SUPPLY
- Operate avionics on the ground (not meant for engine starting)
- Includes Piper style Single-Pin Female aircraft plug, and battery clip adapter
- Low voltage start: will start charging a deeply discharged battery with ZERO terminal voltage
- Fully Automatic with Float/Maintenance Mode
- May be left connected to batteries indefinitely
- Charges all types of lead acid batteries
- 115/230VAC Multi-Voltage Input (voltage selection switch on underside of base)
- Multiple DC Lead Adapters Available
- Mountable, Aluminum case with LED status lights
- Current limiting
- Short Circuit and Reverse-Polarity protection (user-replaceable fuse)
- Capable of full current at 12.6V continuous - 100% duty cycle

- MAY BE USED AS A 12V DC POWER SUPPLY
- Operate in an environment with proper ventilation
- Do not operate in a damp or wet environment

LED Status Indicator Light in normal charge cycle:
- Upper LED (Power): RED – AC power connected, Power Switch ON
- Lower LED (Equalizer): OFF - Charger Not Connected or Connected and minimum battery voltage not sensed
- Lower LED (Equalizer): YELLOW – Charging stages Bulk and Absorption - cooling fan active
- Lower LED (Equalizer): GREEN – Green – Battery charged, Charger in Maintenance Float mode
- Flashing Red & Green LEDs: Safety Timer shut off function