130rd Saiga 12K Magazine - PAHT CF

130rd Saiga 12K Magazine - PAHT CFAllows you to convert the standard magazine (45 rounds) into a 130 round magazine by using the internal parts of a Cyma MP5 magazine. The assembly process is very simple and does not require any modifications to either magazine, neither the Saiga mag nor the MP5 mag. The high magazine capacity allows you to fire all rounds except the last 5, which will remain inside the magazine due to the design of the project. During testing, no feeding issues were

Allows you to convert the standard magazine (45 rounds) into a 130-round magazine by using the internal parts of a Cyma MP5 magazine. The assembly process is very simple and does not require any modifications to either magazine, neither the Saiga mag nor the MP5 mag. The high magazine capacity allows you to fire all rounds except the last 5, which will remain inside the magazine due to the design of the project. During testing, no feeding issues were experienced, and each shot consisted of 3 BBs with no malfunctions.

To refill the gas, you must remove the lower section of the magazine and then take out the gas reservoir to recharge it. There is a hole at the top of the feeding section that makes it easy to remove the internal magazine from the shell using a screwdriver or hex key.

BB reloading can be done from the top of the magazine, just like with the standard Saiga magazine.

Pros:

• Huge capacity (almost 3 times the original capacity). After testing, the gas reservoir allows approximately 40 shots. After 40 shots, the power drops significantly and it barely functions properly.

• Uses easy-to-find parts (Cyma MP5 magazines can be found everywhere).

• No permanent modifications required.

Cons:

• Due to the curve of the magazine, the design is somewhat unusual.

• No last-round stop function.

• You must remove the internal magazine to refill the gas.

Here is a video of the assembly process:

Have fun!