Earl 100-S - Standard 100mm Cavity Wall Lintel

Earl 100-S - Standard 100mm Cavity Wall LintelThe 100 S is a 100mm cavity wall lintel that offers superior strength, thanks to its 3mm thick grade S275 mild steel construction. With a hot dipped galvanized finish and 23. 5kN safe working load at a 3: 1 inner to outer ratio, this lintel is ideal for providing structural support in cavity walls. It has also been load tested in an idependant facility and complies with BS EN 845 2: 2013+A1: 2016, achieving a UKCA mark and ensuring safety. With EPS

The 100-S is a 100mm cavity wall lintel that offers superior strength, thanks to its 3mm thick grade S275 mild steel construction. With a hot dipped galvanized finish and 23.5kN safe working load at a 3:1 inner to outer ratio, this lintel is ideal for providing structural support in cavity walls. It has also been load tested in an idependant facility and complies with BS EN 845-2:2013+A1:2016, achieving a UKCA mark and ensuring safety. With EPS insulation in its core, the Earl 100-S provides both structural support and energy efficiency for your building project.

This lintel is suitable for cavity walls with a 100mm thick inner skin, a 100mm cavity and a 100mm outer skin.  A minimum of 225mm height masonry is required before load application.

Please note, the inner skin mesh plaster key is not present between 225mm and 250mm each end.  Ensure the mesh is not present in the bearing area of the lintel.

A minimum of 150mm bearing each end is required.

Other manufacturers standard duty lintels:

Catnic CG90/100

Keystone S/K-90

Birtley CB90

Stressline SL90

All our lintels are new and usused, however they are stored outside.  Due to this there may be marks and signs of weathering. This does not affect the performance of the product.

Click here for our lintel installation guide