Polyvance 6012 Replacement Element Assembly for Model 7 Airless Plastic Welder

Polyvance 6012 Replacement Element Assembly for Model 7 Airless Plastic WelderThis is the replacement element for the Mini Weld Model 7 Airless Plastic Welder. The previous design had a Ni Chrome wire that, like a light bulb, would seem to burn out at the most inopportune time. This design, however, has a ceramic element that lasts WAY longer. In fact, we put this element on our cycle tester to see how long it would last. The cycle tester would turn on the element for 30 minutes, then turn off the element for 30 minutes. This

This is the replacement element for the Mini-Weld Model 7 Airless Plastic Welder. The previous design had a Ni-Chrome wire that, like a light bulb, would seem to burn out at the most inopportune time. This design, however, has a ceramic element that lasts WAY longer. In fact, we put this element on our cycle-tester to see how long it would last. The cycle tester would turn on the element for 30 minutes, then turn off the element for 30 minutes. This cycle happened 24 times a day for 9 months (a total of 6,500 cycles) and the element never burned out.

Here is another great thing about this element. In the unlikely event that the ceramic core burns out, you can replace just the ceramic core! Of course, what is more likely to happen is that the ceramic element will break if you happen to drop the element assembly.

Features

• Designed with a ceramic element

• Replaceable heater so that you don't have to buy the entire assembly if the heater breaks or burns out

• 200 watts so it gets hot quickly and has enough power to keep the element hot

Specifications

Part No.: 6012
Weight: 1.03 lbs
Length: 11"
Height: 2"
Width: 4"
UPC: 694687004293