Miracle Sealants 511 Impregnator - 1 Pint (16 oz.)

Miracle Sealants 511 Impregnator - 1 Pint (16 oz.)FINAL SALE this item is not eligible for returns or exchanges. ABOUT 511 IMPREGNATORProtect your tile investment with sealer. 511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look. All surfaces

FINAL SALE - this item is not eligible for returns or exchanges.

ABOUT 511 IMPREGNATOR
Protect your tile investment with sealer. 511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery.

Certified for indoor advantage gold status and indoor air quality certification for interior and exterior applications. Resistant to water, oil, and weather.

How to Seal Tile as a Grout Release:

WATER, STAIN & SLIP PROTECTION FOR:

• Glazed Tile
• Ceramic Tile
• Porcelain Tile
• Polished Granite
• Polished Marble
• Sanded Grout
• Quarry Tile
• Granite
• Travertine
• Quartz
• Stucco
• Slate
• Terrazzo
• Agglomerate

SPECIAL FEATURES:

• Covers up to 500 sq. ft. per pint
• Interior & Exterior Use
• U.V. Transparent
• Weather Resistant
• OK for Food Areas
• Superior Coverage
• Easy-to-Use

How to Apply Sealer:

Step 1:
Wipe down the surface to ensure that it is free from dirt and debris. Protect neighboring surfaces such as carpet and wood floors.

Step 2:
Pour the Sealant into an applicator tray and begin applying using the foam applicator. Apply only enough sealant to wet the surface, do not over-apply. Allow the sealer to stand for 3-5 minutes for maximum penetration.

Step 3:
Remove all excess sealer with a clean white towel or microfiber towel. Test an area with a few drops of water. If the water absorbs into the material; repeat step 2 after allowing it to dry for 2 hours. If the water does not absorb, the area is ready for foot traffic after 2 hours. The finished area must be kept dry and free of staining materials for 72 hours.