Pay in installments of $191.42 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 17 - Aug 22
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
LC1F330M7Main Range TeSys Product name TeSys F Product or component type Contactor Device short name LC1F Contactor application Motor control Resistive load Utilisation category AC 3 AC 4 AC 1 Poles description 3P Power pole contact composition 3 NO [Ue] rated operational voltage <= 1000 V AC 50 60 Hz <= 460 V DC [Ie] rated operational current 400 A (at <40 C) at <= 440 V AC AC 1 330 A (at <55 C) at <= 440 V AC AC 3 Motor power kW 160 kW at 380 400 V AC 50 60
Main
| Range | TeSys |
| Product name | TeSys F |
| Product or component type | Contactor |
| Device short name | LC1F |
| Contactor application | Motor control Resistive load |
| Utilisation category | AC-3 AC-4 AC-1 |
| Poles description | 3P |
| Power pole contact composition | 3 NO |
| [Ue] rated operational voltage | <= 1000 V AC 50/60 Hz <= 460 V DC |
| [Ie] rated operational current | 400 A (at <40 °C) at <= 440 V AC AC-1 330 A (at <55 °C) at <= 440 V AC AC-3 |
| Motor power kW | 160 kW at 380...400 V AC 50/60 Hz (AC-3) 180 kW at 415 V AC 50/60 Hz (AC-3) 200 kW at 440 V AC 50/60 Hz (AC-3) 200 kW at 500 V AC 50/60 Hz (AC-3) 220 kW at 660...690 V AC 50/60 Hz (AC-3) 160 kW at 1000 V AC 50/60 Hz (AC-3) 100 kW at 220...230 V AC 50/60 Hz (AC-3) 59 kW at 400 V AC 50/60 Hz (AC-4) |
| [Uc] control circuit voltage | 220 V AC 40...400 Hz |
Complementary
| [Uimp] rated impulse withstand voltage | 8 kV |
| Overvoltage category | III |
| [Ith] conventional free air thermal current | 400 A (at 40 °C) |
| Rated breaking capacity | 2640 A conforming to IEC 60947-4-1 |
| [Icw] rated short-time withstand current | 2650 A 40 °C - 10 s 1800 A 40 °C - 30 s 1300 A 40 °C - 1 min 900 A 40 °C - 3 min 750 A 40 °C - 10 min |
| Associated fuse rating | 400 A aM at <= 440 V 500 A gG at <= 440 V |
| Average impedance | 0.28 mOhm - Ith 400 A 50 Hz |
| [Ui] rated insulation voltage | 1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C |
| Power dissipation per pole | 44 W AC-1 31 W AC-3 |
| Mounting support | Plate |
| Standards | EN 60947-1 EN 60947-4-1 JIS C8201-4-1 IEC 60947-4-1 IEC 60947-1 |
| Product certifications | LROS (Lloyds register of shipping) CB UL BV ABS RMRoS RINA CSA DNV |
| Connections - terminals | Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end Power circuit: lugs-ring terminals 1 cable(s) 240 mm² Power circuit: bar 2 cable(s) - busbar cross section: 30 x 5 mm Power circuit: bolted connection |
| Tightening torque | Control circuit: 1.2 N.m Power circuit: 35 N.m |
| Control circuit voltage limits | Operational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.35...0.55 Uc 40...400 Hz (at 55 °C) |
| Inrush power in VA | 650 VA 40...400 Hz cos phi 0.9 (at 20 °C) |
| Hold-in power consumption in VA | 10 VA 40...400 Hz cos phi 0.9 (at 20 °C) |
| Heat dissipation | 8 W |
| Operating time | 40...65 ms closing 100...170 ms opening |
| Mechanical durability | 10 Mcycles |
| Maximum operating rate | 2400 cyc/h 55 °C |
| Compatibility code | LC1F |
| Motor power range | 55…100 kW at 200…240 V 3 phases 110…220 kW at 480…500 V 3 phases 110…220 kW at 380…440 V 3 phases |
| Motor starter type | Direct on-line contactor |
| Contactor coil voltage | 220 V AC standard |
Environment
| IP degree of protection | IP20 front face with shrouds conforming to IEC 60529 IP20 front face with shrouds conforming to VDE 0106 |
| Protective treatment | TH |
| Ambient air temperature for operation | -5…55 °C |
| Ambient air temperature for storage | -60…80 °C |
| Permissible ambient air temperature around the device | -40…70 °C |
| Operating altitude | 3000 m without |
| Height | 206 mm |
| Width | 213 mm |
| Depth | 219 mm |
| Net weight | 8.6 kg |
Offer Sustainability
| Sustainable offer status | Green Premium product |
| REACh Regulation | REACh Declaration |
| EU RoHS Directive | Under investigation |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| Environmental Disclosure | Product Environmental Profile |
| Circularity Profile | End of Life Information |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 25 reviews
Sort
Product Reviews
★★★★★ 4
Nice, but no spoon
Color: Green
It is a very nice set, but I was disappointed that I did not receive the spoon with the set.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 7, 2026
★★★★★ 5
great price
Color: Green
great price
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 7, 2026
★★★★★ 5
Outstanding machine with loads of uses
Color: Black, Color: Black
First off the TLDR: If you have an espresso machine, buy this. The Maestri 4 in 1 is a solidly built little machine that I truly enjoy using. It has a one piece stainless steel pitcher that is dishwasher safe and the spinner has a removable metal frother. So the only plastic touching your beverage is the small plastic spinner. As of January 2026, there is a coupon for $20, off making it $48 and for this price it simply cannot be beat. Now, if you’d like to know why I bought this over the Velvitiser read on. This is meant to be detailed and helpful for those looking at these two machines or wanting to get the most out of this one. First, cost did not really factor in. I mean I’m not looking to get ripped off, but I would rather wait and save for a superior machine, than purchase an inferior one that I will be unhappy with and is likely to break on me. Just getting that out of the way. Also I looked at the new hot and cold cocoa maker that comes with the hot cocoa mug and the iced chocolate milk glass, as well as a starter kit of 10 cocoa pouches, 5 hot and 5 cold. $179. So why did I get this instead? 1. The Velvitiser, while a beautiful machine (and it is pretty) uses a proprietary hook type spinner to whisk the cocoa while it heats it. Because of this, it is designed to be used with their proprietary hot cocoa packets, which is why 10 are included. You can upgrade to 40. And of course more are on the site. There are also subscription options. However this unit was specifically designed for the cocoa butter content, size of granules, and melting point of their chocolate, you cannot use ANY OTHER chocolate, powder, matcha, etc with it - and doing so VOIDS your warranty. Now people have done it, mostly after a year when the warranty runs out. But they risk burning out the motor. The Maestri on the other hand can use just about anything. As long as you don’t drop a whole azz bar of chocolate in the thing, you’re golden. So far, the chocolate I’ve used is: Cocoa powder, Ghirardelli Sweet Ground Chocolate, and Ghirardelli white chocolate which I grated. They worked beautifully and the drinks were delicious. Also, unlike the Velvitiser, “based on the Aztec Molinillo”, I can grate and use Abuelitas Mexican Chocolate. Take that! Also, this machine goes beyond chocolate, see point 3 for other options. 2. It only holds 8 oz. Well technically 9oz but it counts on 8 oz of milk and an oz of chocolate. Hope you’re not married. Or have a boyfriend. Or a big mug. I wanna make a hot chocky for hubby and me. If I’d gotten this I would have had to make the first mug, give it to him, refill with more milk, more chocolate, and wait for the machine. And let’s be honest, by the time my mug was ready, his would be empty. 😩 The Maestri holds two cups or 16oz, and if you pour that into the pitcher you are still well under the Max Fill Line. It’s plenty to share or for my biggest mugs it’s also great when I make iced drinks or soup which brings me to 3. The Velvitiser was very limited. I had my choice of hot cocoa or the next big thing, COLD cocoa newly introduced in September 2025. That’s it. And I hope you like their flavors cause they are your only options. Now I’m not gonna lie, they look delicious. And they almost had me with the banana milk. But they are clearly operating on a subscription model here. Also, I wanted more options. So the Maestri whispered cold foam and here we are. I’m glad I went with this because yes, the Maestri 4 in 1 will do cold foam. It will also do all kinds of cold drinks. If you have an espresso maker buy this. I should probably put that at the top. Mix any of your syrups or sauces with milk and hit the first button (snowflake). Cookie Butter Milk. Hazelnut Milk. I will buy banana syrup and have Banana Milk (I hope it tastes like Banana Runts), And you can use it to mix up your morning protein shake, as long as it’s not super thick (this is not a blender). I make protein coffee so this is a HUGE step up from my old crappy shaker with the little wire ball in it. Of course you can heat and foam your milk for cappuccinos and lattes, middle button. But I also take out the foaming ring and use that setting to make veggie broth, miso soup, and vegan ginger chik’n broth. As long as you don’t have veggies or other chunks in there you can heat up/cook any clear broth. The last button is the Cocoa button. I’ve made tons of stuff with that. Hot chocolate, mocha, golden milk, matcha, and even chai. Be sure to heat your water and milk using the machine, then steep your tea. Remove your tea bag or loose tea and spices before you run the machine again to add your sugar. None of this was possible with the Velvitiser. This machine looks nice on my espresso bar, I like that the pitcher is held to the base magnetically. I love how easy it is to clean. But most of all I absolutely love how versatile it is. I’ve only had it a short period of time but it has become central to my drink making. I use it each morning for my espresso, I use it to make an iced drink at some point during the day, and it’s winter so I am using it to make a broth most days as well. So yeah, glad I went with the Maestri 4 in 1. It’s my favorite new addition to the espresso station.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 18, 2026
★★★★★ 5
A terrific frother and steamer - quiet, stylish and affordable!
Color: Black
This is an excellent frother steamer! I got the black model - it is stylish, quiet, and everything works as advertised. It is very quick and convenient to use, and has definitely enhanced our coffer experience. We are totally happy with it!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026
★★★★★ 1
BUYER BEWARE - DO NOT BUY!!
Color: White
BUYER BEWARE - DO NOT BUY!
We had the Maestri House Milk Frother for 5 months. It suddenly quit spinning. I contacted support as instructed in the manual. I received a reply that there is a 1 year warranty and to send my order # and video showing the problem. I did the same day. No response. I waited a week, still no response. I sent the order # and video again. It has been almost a month, I have sent 4 emails, and no one will get back with me. I found a phone number online but when I called there is an automated response with their hours and then hangs up on me. THIS ITEM WILL QUIT WORKING AND NO CUSTOMER SERVICE! TERRIBLE PRODUCT. TERRIBLE COMPANY!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 27, 2026
recommand products
Oil Filter 60205014 for Sany Excavators
123.95
860121090 Hydraulic Oil Suction Filter XCMG XE150
119.39
Filter Fuel/Water Separator Filter FS20081 Compatible With Autocar Freightliner Western Star Trucks , Replaces Detroit Diesel A0000904851; Freightliner A245007; Fleetguard FS20081
47.99
Fuel Injection Line Set 131501060 131507601 131507611 131501050 for Perkins Engine 403D-15 403D-15T 403C-15
120.00
Fuel Injection Pipe 3974604 for Bobcat 643 645 743 225 231 325 331 1600 CT225
59.99