Sterilizer Machine - Salon Barber Dental Tattoo Autoclave Clean Pot

Sterilizer Machine - Salon Barber Dental Tattoo Autoclave Clean PotHFS XDQ 501 Professional Dry Tattoo Sterilizer Scissor Autoclave Disinfection Tool Specifications [MATERIAL]: The inner tank is made of aluminum and can withstand high temperature; [SIZE]: Inner tank top diameter: 43mm; Depth: 75mm; [INTELLIGENT TEMPERATURE CONTROL]: The sterilizing cup is equipped with an automatic temperature regulator, which can automatically turn on off the power supply according to the real time monitoring temperature; [HIGH

HFS XDQ-501 Professional Dry Tattoo Sterilizer Scissor Autoclave Disinfection Tool

Specifications

[MATERIAL]: The inner tank is made of aluminum and can withstand high temperature;

[SIZE]: Inner tank top diameter: 43mm; Depth: 75mm;

[INTELLIGENT TEMPERATURE CONTROL]: The sterilizing cup is equipped with an automatic temperature regulator, which can automatically turn on / off the power supply according to the real-time monitoring temperature;

[HIGH EFFICIENCY STERILIZATION]: By heating quartz sand sufficiently in advance, the sterilization cup can achieve the purpose of sterilization only by placing the apparatus to be sterilized for 20-30 seconds;

[APPLICATION]: It is mainly used for disinfection and sterilization of beauty tools, including nail clippers, tattoo needles, eyebrow clips, scissors and nail clippers; WARNING: Tools may be hot to touch!

How to Use

• Put the tool sterilizer on a stable surface.
• Open the lid. pour quartzite into the pot; fill quartzite up to 80% of the inside capacity.
• Connect the power. and turn on the switch. The light turns red and the product begins to heat at the same time.
• After 12 - 18 min of heating. insert the tools (scissors. razors. nail cutter. etc) into quartz sand vertically.
• Wait for 20--30 seconds. and pull tools out of the machine.
• When the inside tank reaches the setting temperature. the light will automatically turn off and the sterilizer will stop heating.7. The sterilizer will heat up automatically when the temperature gets lower than 135 degree. The indicator light will turn on again.

WARNING: Tools may be hot to touch!