Canare L-5.5CUHD 12G SDI 75 OHM Video Coaxial Cable (Black) - 200M

Canare L-5.5CUHD 12G SDI 75 OHM Video Coaxial Cable (Black) - 200MCanare's L 5. 5CUHD is a 75 OHM video Coax cable that can effectively transmit 12G SDI signals over 100 meters. The outside diameter of the cable is the same as their existing L 5CFB and L 5CHD cables to ensure interoperability. Canare has also introduced a new BNC Connector the BCP D55UHD to ensure minimal return loss while using these cables. Specifications Electrical Characteristics Rated Voltage AC: 60Vrms Temperature Range: 20 ~ +75C D. C.

Canare's L-5.5CUHD is a 75 OHM video Coax cable that can effectively transmit 12G-SDI signals over 100 meters. The outside diameter of the cable is the same as their existing L-5CFB and L-5CHD cables to ensure interoperability. Canare has also introduced a new BNC Connector the BCP-D55UHD to ensure minimal return loss while using these cables.

Specifications

Electrical Characteristics

• Rated Voltage AC: 60Vrms
• Temperature Range: -20° ~ +75°C
• D.C. Resistance - Inner Conductor: ≤12.8Ω/km (20°C) / Outer Conductor: ≤10.3Ω/km (20°C)
• Insulation Resistance: ≥1000MΩ km
• Voltage Proof: AC1000V 1 minute Not Breakdown
• Characteristic Impedance: 75±3Ω
• Nominal Capacitance: 52nF/km ( 1kHz)
• Nominal Attenuation-
• 10MHz: 1.6dB/100m
• 30MHz: 2.6dB/100m - HDTV
• 72MHz: 3.9dB/100m - D2 NTSC
• 88MHz: 4.3dB/100m - D2_PAL
• 135MHz: 5.3dB/100m - D1
• 180MHz: 6.1dB/100m
• 270MHz: 7.5dB/100m
• 750MHz: 12.9dB/100m - HD-SDI
• 1.3GHz: 17.1dB/100m
• 1.5GHz: 18.6dB/100m - 3G-SDI
• 2.0GHz: 21.6dB/100m
• 2.5GHz: 24.3dB/100m
• 3.0GHz: 26.8dB/100m - 6G-SDI
• 6.0GHz: 39.1dB/100m - 12G-SDI

Mechanical Characteristics

• Tensile properties of Sheath - Tensile strength: ≥10.0 MPa / Elongation: ≥190 %
• The permission tension: ≥ 98 N

General

• Inner Conductor-
• Construction (qty/mm): 1/1.35A (Annealed Copper)
• Nom. Cross Section Area (mm²): 1.43 (16AWG)
• Overall Diameter (mm): 1.35
• Insulation: Thickness (mm): 2.10 Foamed Polyethylene / Overall Diameter (mm): 5.55
• Outer Conductor 1- Thickness (mm) 0.04 (Copper Laminated) / Overall Diameter (mm): 5.6 (Tape)
• Outer Conductor 2-
• Construction (carr/end/mm): 24/ 8/ 0.12TA
• Pitch (mm): ≤ 37
• Overall Diameter (mm): 6.2
• Sheath Thickness: (mm): 0.75

TS100 Strip Settings

• Jacket Strip (not in line with other screws)- 5.5mm
• Left Strip (shield) - 7.0mm
• Middle Strip (insulator) - 4.5mm
• Right Strip (conductor) - 2.0mm