Face Mask Opt 3

Step 1
Cut two of the larger rectangles from both types of fabric, one rectangle of each fabric will be used per mask.

Step 2
Pin three 1" folds/pleats on each side of the mask. Make sure the tucks/pleats are all going in the same direction (the finished mask should be at least 3.5 inches in height and 6.75 inches in length when pleats are not expanded).

Step 3
Press pleats to hold.

Step 4
Place two pleated rectangles together, right sides facing.

Step 5
Place ends of tie straps in the corners between layers.

Step 6
Sew around the rectangle with 1/4" seam allowance leaving a 2-inch gap along with one of the long sides for turning. Reinforce corners and ensure tie straps are secure by sewing forward and backward at the corners.  

Step 7
Turn the mask inside out and press flat, keeping 1/4" seam allowance pressed toward the inside of the mask at the opening.

Step 8
Sew around the edge of the mask twice to secure. the tucks and close the opening.

*Make sure to use ¼” seam allowance while sewing.