1200W 20A DC Converter Boost Step-up Power Supply Module IN 8-60V OUT 12-83V

Power description: Because the input current of this power supply is up to 20A. The output power is related to the input voltage. The higher the input voltage, the higher the high power. For example, the input 12V*20A power is 240W. The input 24V*20A is 480W. This is the maximum power. Due to the limited heat dissipation area, please add a 12V fan to dissipate heat when the input voltage exceeds 10A or the output current reaches 10.

Module parameters:

Module model: SZ-BT07CCCV-A

Module name: 1200W boost constant current module

Module nature: non-isolated boost module (BOOST)

Input voltage: DC10-60V (input 10-60V directly without jumper cap to select voltage) (2016/5/15 update)

Input current: 20A (MAX) more than 15A, please add fan for heat dissipation (when the input voltage is 12-24V, the input current can reach 25A)

Static working current: 15mA (when 12V rises to 20V, the higher the output voltage, the static current will increase)

Output voltage: 12-83V continuously adjustable (the default output is adjusted to 19V, if you have a multimeter, the buyer can adjust it yourself)

Output current: 18A MAX, please strengthen heat dissipation if it exceeds 10A (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)

Constant current range: 0.5-18A (+/-0.3A)

Input anti-reverse connection: Yes (150A power MOS anti-reverse)

Low battery protection: Yes (9-50V adjustable)

Working temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high)

Working frequency: 150KHz

Conversion efficiency: 92%-97% (Efficiency is related to input, output voltage, current, pressure difference. Small pressure difference, high efficiency)

Input overcurrent protection: Yes (input over 25A, automatic protection, power supply does not boost)

Short circuit protection: Yes (input 30A fuse) double short circuit protection, safer to use.

Input reverse connection protection: Yes (150A power MOS tube is anti-reverse. It can be reversed for a long time)

Installation method: 4 3mm copper pillars

Wiring mode: terminal block (please use high-current pure copper wire)

Module size: length 130mm width 52mm height 53mm

Output power:=input voltage*20A, such as: input 12V*20A=240W, the maximum power when inputting 12V is 240W

Input voltage *20A such as: input 24V*20A=480W, that is, when input 24V, the maximum power is 480W

Note: The maximum power is 240W when the input is 12V, the maximum power is 480W when the input is 24V, and the maximum power is 720W when the input is 36V

The power supply material is very fierce. The input uses 4 63V/470UF high-frequency low-resistance electrolytic capacitors, and the output 3 100V/470UF electrolytic capacitors. The 33MM ultra-high-power iron-silicon-aluminum magnetic ring is wound with three 1.2MM pure copper wires in parallel to prevent over-temperature magnetic saturation under high current conditions. Use a 116MM*58MM*14MM aluminum radiator to dissipate heat. And the heat sink has 5015 fan (5MM*5MM*15MM) mounting holes; the output voltage and current of the imported power management chip are continuously adjustable.

Output voltage/output current regulation/input low battery protection regulation

Voltage adjustment: Use a flat-blade screwdriver to adjust the output terminal "V-ADJ" potentiometer (marked in the picture above) clockwise to increase and counterclockwise to decrease) when the power is turned on and there is no load. Due to the large capacity of the output capacitor, The response will be slower when the output voltage is adjusted from a high voltage to a low voltage. The adjustment range of the instrument is smaller.

1 The voltage of the input power supply must be above 10V.

Application range:

1. DIY a regulated power supply, input 12V, output can be adjusted from 12-80V.

2. To supply power to your electronic equipment, you can set the output value according to your system voltage.

3. As a vehicle power supply, power your laptop, PDA or various digital products.

4. DIY a high-power notebook mobile power supply: equipped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go.

5. The solar panel stabilizes the voltage.

6. Charging batteries, lithium batteries, etc.

7. Drive high-power LED lights.

Package Includes:

1 x Module