Pro Intercom BLAZON 3 Signal Light & Audible Alert

Pro Intercom BLAZON 3 Signal Light & Audible AlertStrobe Light and Switchable Sonic Alert The Blazon3 provides the combination of a xenon lamp with an audible annunciator. Whenever any signal lamp button on any station in the same circuit is pressed, the Blazon3 will be activated. The xenon lamp is permanently connected. The audible may be switched between constant, pulsed, and off. Performance: Blazon3 is triggered by the same voltage which lights the normal signal lamps in the intercom system.

Strobe Light and Switchable Sonic Alert

The Blazon3 provides the combination of a xenon lamp with an audible annunciator. Whenever any signal lamp button on any station in the same circuit is pressed, the Blazon3 will be activated. The xenon lamp is permanently connected. The audible may be switched between constant, pulsed, and off.

Performance:

Blazon3 is triggered by the same voltage which lights the normal signal lamps in the intercom system. Whenever any signal lamp button on any station in the same circuit is pressed, the Blazon3 will be activated. The xenon lamp is permanently connected. The audible annunciator may be switched among constant, pulsed, and off. Circuitry is provided to sustain the Blazon3 for 4 seconds after being triggered. The xenon lamp has a flash rate of 2Hz, providing 8 flashes per cycle.

The Blazon3 is connected to the headset intercom system in the same manner as a belt pack. It has two 3-pin XLR connectors on the rear panel. By convention (to differentiate from microphone inputs) the female connector is designated as input. The male connector is provided for looping onwards to the next station in the system. Reversing these connections will not affect operation.

Blazon3 is powered by the intercom power supply and requires no batteries or other external power source. In its ready mode it draws only 21.1mA; with the strobe active, 56mA, and; with the strobe and audible annunciator, only 108mA. When calculating power supply requirements, you may consider the Blazon3 as the approximate equivalent of 3 or 4 belt packs.

Durability:

The ribbed, extruded aluminum case; glass-filled nylon end bezels; internal support system for the PC board, and; best quality XLR-type connectors, all contribute to the Blazon3's ability to withstand rough usage.

Value:

The comparatively low price of the Blazon3 is made possible by the minimized assembly cost resulting from simplicity of construction.

Compatibility:

Blazon3 is compatible with Clear-Com and other lesser known (unbalanced 200 ohm) headset intercom systems.

Product Highlights

• Xenon Signal Light
• Top Mounted Round Strobe
• Audible Annunciator
• Audible May Be Switched
• Constant, Pulsed, or Off
• 3-Pin XLR Connection
• Powered by Intercom System