STEIN Wire Core Work Positioning Lanyard

STEIN Wire Core Work Positioning LanyardThe device should never be used as a Fall Arrester or as part of a Fall Arrest System. The maximum rated load by these instructions is 100kg for a single user. Lanyards used for restraint should be of such a length that a fall situation cannot occur. Lanyards used in work positioning are designed to support the user when working at height and when needing a hands free environment. It may be necessary to supplement arrangements for work positioning or

The device should never be used as a Fall Arrester or as part of a Fall Arrest System. The maximum rated load by these instructions is 100kg for a single user. Lanyards used for “restraint” should be of such a length that a fall situation cannot occur. Lanyards used in “work positioning” are designed to support the user when working at height and when needing a hands-free environment. It may be necessary to supplement arrangements for work positioning or restraint with collective means (e.g. Safety Nets) or personal means (e.g. Fall Arrest Systems by EN363) of protection against falls from height. A Fall Arrest backup must be used if the user is not in “restraint” and there is a risk of a fall. An energy absorber must be fitted to the backup complying with EN355. The total length of an EN354 lanyard connected to an energy absorber including the energy absorber, terminations and connectors shall not exceed 2.0m.

Features:

• Applicable Standards - EN 358
• Application - PPE
• EWL Length - 5.0m
• Manufacturer - STEIN
• Material (inner) - 6mm Stainless Steel Wire
• Material (outer) - Polyester
• Standard - EN358:1999
• Diameter (mm) - 13