Pay in installments of $42.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 25 - Aug 30
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ResinTech HPP Fast-Cure Polyaspartic CoatingStocked by Canopus Supply North Vancouver, BC. Call 250 233 3000 to confirm current availability or arrange pickup. ResinTech HPP High Performance Polyaspartic Fast Cure, UV Stable Traffic Surface Two Component, High Solids Aliphatic Polyaspartic Topcoat, Sealer, Traffic Wear Coat & Broadcast Seal Coat Brand: ResinTech 10 L kit (2. 6 US gal), 1: 1 by weight ResinTech HPP is a fast curing aliphatic polyaspartic coating designed to be the exposed
Stocked by Canopus Supply — North Vancouver, BC. Call 250-233-3000 to confirm current availability or arrange pickup.
ResinTech HPP High-Performance Polyaspartic — Fast-Cure, UV-Stable Traffic Surface
Two-Component, High-Solids Aliphatic Polyaspartic — Topcoat, Sealer, Traffic Wear Coat & Broadcast Seal Coat | Brand: ResinTech | 10 L kit (2.6 US gal), 1:1 by weight
ResinTech HPP is a fast-curing aliphatic polyaspartic coating designed to be the exposed surface layer of ResinTech traffic and resin flooring assemblies. It combines UV stability, fast return-to-service, chemical resistance and traffic-ready durability in one product, used clear or pigmented, indoors or outdoors — as a stand-alone topcoat on prepared concrete or as the final wear layer over epoxy, broadcast and decorative systems. Confirm coverage, recoat window, slip-resistance and substrate preparation against the current ResinTech TDS, SDS and project specification before use.
| Field | Details |
| Brand | ResinTech |
| Product Code | HPP |
| Product Type | Two-component, high-solids aliphatic polyaspartic coating |
| Kit / Pack Size | 10 L kit — Part A 5 L + Part B 5 L (2.6 US gal mixed) |
| Mix Ratio | 1:1 by weight (Part A : Part B) |
| Colour / Finish | Clear or field-pigmented; light, medium or heavy broadcast texture |
| System Role | Primary UV-stable traffic surface / topcoat / seal coat |
Best-Use Applications
Confirm all applications against the current ResinTech TDS before specifying.
- Parking decks, drive aisles, parking stalls and light-to-moderate vehicular traffic zones
- Balconies, podium decks, exterior walkways, corridors and service areas
- Fast-track commercial, institutional, garage and light industrial flooring
- Clear or pigmented seal coat over decorative flake, quartz, sand or metallic epoxy floors
- UV-stable exposed topcoat over compatible ResinTech epoxy and reinforced broadcast layers
- Operating strata, parkade and commercial projects where rapid return-to-service matters
- Weather-exposed concrete coating work where colour and gloss retention are important
Product Data
Source: ResinTech HPP Technical Data Sheet (TDS-HPP-1.0). Typical values at 23 °C and 50% RH unless noted. Confirm against the current TDS before specifying or ordering.
| Property | Typical Value | Note |
| Components | Two — Part A resin + Part B hardener | Mix only what can be placed within working time |
| Mix Ratio | 1:1 by weight | Part A : Part B |
| Solids Content | 98% by weight | ASTM D1353 |
| Chemistry | High-solids aliphatic polyaspartic | UV-stable exposed-surface chemistry |
| Appearance | Clear or pigmented | Use compatible pigment / colorant where specified |
| Odour | Low to moderate | Ventilation required during application and cure |
| Shelf Life | 12 months | Unopened; stored properly at 10–30 °C |
Performance Properties
Typical values from the ResinTech HPP TDS. Actual results depend on substrate, preparation, mixing, film build and conditions — confirm against the current TDS.
| Property | Typical Value | Test Method / Note |
| Bond Strength to Concrete | 310 psi | ASTM D4541; substrate typically controls result |
| Tensile Strength | 2,900 psi | ASTM D412 |
| Elongation | 20% | Flexible traffic-capable film; not a crack-bridging membrane |
| Abrasion Resistance | 30 mg loss (excellent) | ASTM D4060, CS-17 wheel, 1000 g, 1000 cycles |
| Shore Hardness | 70 D | ASTM D2240 |
| Tack-Free Time | 1 hour | ASTM D1640 typical |
| Drying Time | 4 hours at 15 mils | ASTM D1640, 24 °C / 50% RH |
| UV Stability | Excellent | Suitable as exposed interior / exterior top surface |
| Chemical Resistance | Excellent | For maximum chemical / abrasion upgrade, use CRU where specified |
| Return-to-Service Speed | Fast | Designed for rapid-turnaround flooring and traffic coating work |
Working Time, Recoat & Cure
Cool temperatures, high humidity, low airflow and thicker films extend cure; hot conditions shorten working time. Plan mixing, manpower and staging before opening kits. Confirm against the current TDS.
| Condition | Typical Value | Practical Note |
| Recoat Window | 1–2 hours | Recoat when firm enough to accept the next layer without damage |
| Light Foot Traffic | 3–4 hours | Protect from dirt, water and early abuse |
| Vehicle Traffic | About 24 hours | Longer in cool or damp conditions, or at heavy film build |
| Full Cure | 5–7 days | Delay aggressive cleaning and chemical exposure until full cure |
| Rain / Moisture Protection | 6–12 hours minimum | Protect exterior work during early cure |
Coverage & Film Build
Theoretical coverage per US gallon (10 L kit ≈ 2.6 US gal); adjust for texture, profile, porosity and method. Confirm against the current TDS.
| Use Mode | Typical Film Build | Typical Coverage |
| Sealer / Thin Coat | 5–10 mils | 530–265 ft²/US gal |
| Standard Traffic Coat | 10–20 mils | 265–130 ft²/US gal |
| Heavy-Duty HPP Coat | 20–30 mils | 130–85 ft²/US gal |
| Broadcast Seal Coat | 8–20 mils | Depends on broadcast profile, aggregate size and texture |
| Pigmented Coat | 10–20 mils | Depends on colour, hiding, substrate profile and backroll technique |
Application Conditions
Confirm all conditions against the current ResinTech TDS and project specification before use.
| Condition | Requirement |
| Substrate Temperature | 10–30 °C |
| Ambient Temperature | 10–32 °C |
| Relative Humidity | Maximum 85% recommended |
| Dew Point | Substrate at least 3 °C above dew point |
| Concrete Moisture | Dry concrete; verify moisture before coating |
| Concrete Age | Normally 28 days unless the designer approves earlier work |
| Minimum Concrete Strength | 3,600 psi compressive and 220 psi tensile pull-off |
Application Notes
Always confirm application requirements against the current TDS, SDS and project specification before use.
Request the current ResinTech HPP Technical Data Sheet (TDS) and Safety Data Sheets (SDS) from Canopus Supply before specifying or ordering.
Trade Purchasing Note
All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.
Technical information is provided for professional reference only. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.
For volume orders, system compatibility questions, pickup timing or delivery across BC, contact Canopus Supply before placing a bulk order.
Call: 1 (250) 233-3000
Email: [email protected]
Pickup: Unit 103, 185 Forester Street, North Vancouver, BC
Canopus Supply Inc. — Authorised ResinTech Distributor, Metro Vancouver & BC
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy