eSUN ePLA-SS 1.75mm 1KG 3D Printer Filament

eSUN ePLA-SS 1.75mm 1KG 3D Printer FilamentWith faster cooling and great fluidity, ePLA SS is created for cost effective high speed printing needs. Compatible with most FDM 3D Printers and high speed printers, this filament is easy to print and has high successful print rate! Features Super Speedy PLA Filament: eSUN ePLA SS, improved based on ordinary PLA, not only retains the environmental friendly characteristics, but also add special materials to strengthen its fluidity and fast printing

With faster cooling and great fluidity, ePLA-SS is created for cost-effective high speed printing needs. Compatible with most FDM 3D Printers and high speed printers, this filament is easy to print and has high successful print rate!

Features

• 【Super Speedy PLA Filament】: eSUN ePLA-SS, improved based on ordinary PLA, not only retains the environmental-friendly characteristics, but also add special materials to strengthen its fluidity and fast printing performance, which makes it an ideal choice of cost-effective rapid printing consumables.
• 【High Speed Printing】: eSUN ePLA-SS, under the condition of 0.4mm nozzle Bambu P1 series machines, can reach the printing speed of 35mm³/s, and the maximum printing speed can be increased to 300mm / s. And it has good balance between high speed printing and printing quality.
• 【High Compatibility】: eSUN ePLA-SS filament, with excellent speedy printing performance, is better compatible with high speed printers, such as such as AnkerMake M5, Bambu Lab X1/ P1P, Creality K1/K1 MAX , Flsun V400, Raise3D Pro3/ RMF500, etc. And it can be used in cultural creativity, animation industry, film and television props, etc.
• 【Easy to Print】: Compared with ordinary PLA filament, eSUN ePLA-SS has higher precision, no warping, less brittle and not easy to break. And it melts well, feeds smoothly and constantly without clogging the nozzle or extruder, thus assuring high printing successful rate and better forming effect.
• 【Fast Cooling& Smooth Extrusion】: eSUN ePLA-SS, with more balanced melting and cooling performance, has smoother flow in the molten state, and it can be cooled faster when printing and molding. And it has high fluidity and low specific heat capacity, and excellent fluidity and controlled viscosity factor avoid excessive stringing and sagging.

Specifications

Model: eSun ePLA-SS
Diameter Format: 1.75mm
Net Weight: 1kg
Printing Temperature: 210-230℃ (Recommended Temperature 215℃)
Bed Temperature: 45-60℃
Density: 1.24 g/cm3
Tensile Strength: 20-30 MPa
Elongation at Break: 5-10%
Flexural Strength: 101.2 MPa
Flexural Modulus: 3111.8 MPa
IZOD Impact Strength: 3.09 KJ/m²
Melt Flow Index (g/10min): 3.5-4.5 (190℃/2.16kg)
Heat Distortion Temperature: 50-60 (℃, 0.45 MPa)
Tolerance: ±0.03mm
Packaging: Vacuum packed with silica desiccant
Warranty: 1 Year