SKU: 59711332233

Blackmagic Design Spares - Camera PCC6KPro - PCB Battery

Sale price$1174.20 Regular price$1304.67
Save 10%

Pay in installments of $326.17 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 29 - Oct 4

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Blackmagic Design Spares - Camera PCC6KPro - PCB Batterythe Blackmagic Design Spares Camera PCC6KPro PCB Battery is the dedicated power handling board located directly behind the battery compartment of the Pocket Cinema Camera 6K Pro. While the "Power Assembly Cable" is the wiring that carries the electricity, this Battery PCB is the "intelligence" that manages the NP F570 battery interface. The Power Manager In the 6K Pro, the battery system is more complex than in the 4K 6K models because it must handle

the Blackmagic Design Spares - Camera PCC6KPro - PCB Battery is the dedicated power-handling board located directly behind the battery compartment of the Pocket Cinema Camera 6K Pro.

While the "Power Assembly Cable" is the wiring that carries the electricity, this Battery PCB is the "intelligence" that manages the NP-F570 battery interface.

The Power Manager

In the 6K Pro, the battery system is more complex than in the 4K/6K models because it must handle the significantly higher power draw of the $1,500\text{nit}$ HDR screen.

  • Voltage Regulation: It stabilizes the raw battery voltage to ensure a consistent flow to the Main PCB, preventing voltage "sags" that could cause the camera to drop frames during high-bitrate recording.

  • Smart Charging: This board manages the internal charging logic. When you plug the camera into AC power via the 2-pin Weipu port, this PCB regulates the current sent into the NP-F570 battery.

  • Communication Bridge: It passes battery telemetry (percentage/voltage data) from the battery to the camera's software so you can see accurate remaining run-time on the LCD.

When to Replace the Battery PCB

  • Charging Failure: If the camera works on AC power but refuses to charge a known-good NP-F570 battery, the charging circuit on this specific board is likely burnt out.

  • Immediate Shutdowns: If the camera turns off the moment the AC cable is pulled, even with a full battery, the "switch-over" MOSFET on this PCB has failed.

  • "Battery Not Detected": If the camera shows a "cross" or empty icon even with a fresh battery inserted, the contact pins on the PCB are either bent, oxidized, or the logic chip has failed.

  • Heat Damage: Because this board handles the heat of charging and high-current discharge, components can eventually "cook" if the camera is used in extremely hot environments for extended periods.


Key Features

  • Genuine OEM Part: Specifically designed for the NP-F570 form factor and voltage requirements.

  • Heavy-Duty Contacts: Features high-conductivity gold-plated pins to ensure a low-resistance connection with the battery.

  • Integrated Safety: Includes thermal fuses to prevent the battery from overheating or "venting" in the event of an internal short circuit.


Technical Installation Note

Replacing the Battery PCB is a Level 2 repair, but it requires careful routing.

  • Pin Alignment: When installing the board, ensure the battery pins are perfectly centered in the battery door opening. If the board is slightly crooked, the battery will be difficult to slide in and may damage the new pins.

  • Ribbon/Wire Tension: This board connects to the Main PCB via a multi-pin harness. Ensure there is enough "slack" in the wire so that it doesn't rub against the sharp magnesium edges of the internal frame.

  • Contact Cleaning: Before installing, ensure no finger oils are on the battery contact pins. Use a quick wipe of Isopropyl Alcohol if you accidentally touch them.

  • The "Spring" Factor: Be careful not to lose the battery ejector spring mechanism, which often sits adjacent to this PCB.

Expert Tip: If your camera is losing power intermittently, check the physical tension of the battery pins on the PCB. Sometimes they just need to be very gently "sprung" forward with a non-conductive tool to make better contact with the battery terminals, saving you from needing a full replacement.

Are you finding that the camera won't charge the battery, or is it failing to recognize that a battery is even inserted?

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 59711332233

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
shannon oakley
Boise, US
★★★★★ 5
Great room divider
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
This is a room divider and would work great as one! I’m using it as a cover for my car port/garage so you can’t look in and see my messy garage as easily and for what I’m using it for it’s a little not quite as sturdy as I need it to but I’m sure it’s not meant to be used outside anyways so I don’t fault the product since I’m not using it as intended… with that said though…. It still covers my garage beautifully and really does exactly what a I need it to! I’m sure the wind may blow it over if it gets too crazy but I don’t see it breaking by any means. The frame is metal and drilled together using long screws. It’s very well built. The cloth for the panels is this waterproof type material that’s kind of like the gazebo roof feeling. So it’s easy to clean and it’s easy to wipe. You can put it straight or bend the panels and either way it still stands up. You don’t HAVE to bend it to make it stand or anything. You can literally use it straight across like I am in the pictures. Overall very happy with this product and it’s also very tall so it truly covers a lot (hides a lot lol). I’m 5’8 so you can see it’s taller than me by the pic I took
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
F
3fingers
Waukegan, US
★★★★★ 3
OK. Drag to setup. Needs more stable feet
Color: Black, Size: 4 Panel-88''
I was glad to find these. The benefits of having them in a recording setup is helping suppressing noise for a vocal booth. It's a layer that surrounds the recording box. Nice! (But away from audio hardware or DAW). Here is the not so nice part: The feet! It's able to stand (as it needs to do this). But it cannot be bumped. If it does, it's coming down onto something. I believe the feet units are not wide enough (or long enough). That makes for an easier tumble risk. So far, they haven't, but it's like being in the woods over leaves - it feels dangerous with every step! (That's actually true). They are tall enough, wide enough, material OK. But the feet for the main assembly do not seem sturdy enough. There are ways to help that. I'm thinking a 2x4 to augment the base. Make them wider. It can be done. It was a drag to set these up, and I'm sure to modify them like i'd want them. But, they do come in at a much lower price that other similar dividers. Consider all this because I've seen more solid dividers ( with padding) that would basically be the 1/2 cost of these. But i'd think they'd be easier to assemble, stand sturdier, and without that feeling of an impending fall (or fail). This is my opinion. I hope it helps.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
A
Verified Purchase
Amazon Customer
Lowell, US
★★★★★ 1
wrong size of metal components. incorrect items. non functioning
Color: Black, Size: 4 Panel-88''
The owner of this product sent me the incorrect pieces when I tried to install. It didn’t fit. The pieces were missing holes and once I connected the wrong pieces after knowing now they’re stuck and I can’t return them even though Amazon was kind enough to refund me. I just want to warn people this product is such a disappointment because it looks good. It’s good price, but you can’t even assemble the thing very disappointed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
F
foundbyXtopher
Phoenix, US
★★★★★ 4
Sturdy Folding Room Divider with Good Privacy Coverage and Modern Look
Color: Black, Size: 4 Panel-88''
I picked this room divider up to help separate space in a room without needing permanent walls, and overall it works very well for creating privacy while still looking clean and modern. The size is one of the biggest advantages. At 6 feet tall and roughly 88 inches wide, it creates a noticeable visual separation and works well for apartments, dorms, offices, studios, shared rooms, or content creation setups where you want to hide clutter or define different areas. The black fabric and frame design give it a simple modern appearance that blends easily into most spaces without looking overly decorative or outdated. It has a clean minimalist look that works especially well in offices, bedrooms, gaming rooms, or studio environments. Assembly was fairly straightforward overall. Once fully put together, the divider feels reasonably stable for normal indoor use. The folding panel design also makes it flexible enough to angle different ways depending on the room layout. The portability is another strong point. Since it folds down, it is much easier to move or reposition compared to permanent partitions or heavier wooden dividers. That makes it practical for temporary privacy setups or changing room layouts frequently. Privacy performance is solid visually. It blocks sightlines well enough for changing areas, workspaces, video backgrounds, or separating sections of a room. The fabric also softens the space slightly instead of feeling harsh or industrial. One thing worth noting is that while it provides visual privacy, it is not soundproof. It helps define space and reduce some openness, but conversations and noise will still pass through normally. The material quality feels decent for the price range. The frame is lightweight but functional, though I would still avoid rough handling or constant aggressive repositioning over time. Value for money is good considering the size, flexibility, and convenience. Similar room dividers can become expensive quickly, especially for taller multi-panel setups. Overall, this is best for anyone needing an affordable flexible way to create separation and privacy in shared or open spaces. It works especially well for apartments, dorms, offices, studios, remote work setups, or content creators wanting a cleaner background without permanent construction.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
R
RealDeal
Port Orchard, US
★★★★★ 5
Looks nice but it's not very stylish, works as intended, happy with purchase
Color: Black, Size: 4 Panel-88''
This 6 ft room divider is exactly what I needed and works great! It was very easy to set up and took only a few minutes to assemble. I was pleasantly surprised by how lightweight it is, and it folds up easily for storage when not in use. The fabric-style panels look nice and provide good privacy, and the included clips help keep everything neatly in place. It’s a simple but effective design that does what it’s supposed to do. Because it’s lightweight, it may need a bit of extra support depending on where you place it—I used small weights on the base, and that completely solved the stability issue. Overall, I’m very happy with this purchase. It’s practical, easy to use, and a great value for the price. I would definitely recommend it! Industrial
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026

recommand products