Pay in installments of $34.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 22 - Sep 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
7.5-Inch Rasp Steel Bull Cutter Knife — Teal Marbled Resin Handle, Silver Pins, Lanyard Hole & Leather Sheath | JW Steel CraftsThis rasp steel bull cutter knife measures approximately 7. 5 inches overall with a 4 inch sheepsfoot blade and a 3. 5 inch teal marbled resin handle. The blade is forged from dense high carbon rasp steel and hand finished to a hardness of 5558 HRC. The rasp texture runs across the blade flat as a visible mark of the forging process. A leather sheath is included for safe carry and storage. This is the only rasp steel bull cutter knife at JW Steel
This rasp steel bull cutter knife measures approximately 7.5 inches overall with a 4-inch sheepsfoot blade and a 3.5-inch teal marbled resin handle. The blade is forged from dense high-carbon rasp steel and hand-finished to a hardness of 55–58 HRC. The rasp texture runs across the blade flat as a visible mark of the forging process. A leather sheath is included for safe carry and storage.
This is the only rasp steel bull cutter knife at JW Steel Crafts with a teal marbled resin handle, silver pins, and a lanyard hole in this configuration.
The History Behind This Blade
In the American cattle country of the 1800s, ranch hands and livestock workers carried a short, wide-bladed cutter as their everyday working tool. The bull cutter was built for one job: heavy, controlled cuts that a narrow blade could never handle. Farriers and stockmen ground their blades from old steel rasps, turning worn-out tools into reliable cutting knives. That rasp-steel tradition survives in every JW Steel Crafts bull cutter forged today.
Blade Performance
The blade is forged from solid rasp steel, a dense, high-carbon steel that holds a strong working edge through heavy daily use. The sheepsfoot profile keeps the cutting edge straight and flat for controlled push cuts through meat, joints, and tough ingredients. There is no belly curve to redirect force. Every stroke lands clean and direct. The hand-finished rasp texture across the blade surface is not a decorative finish.
It is the natural result of forging from rasp steel stock. Hardened to 55–58 HRC, the blade sits between flexible and brittle, tough enough for impact work, hard enough to hold an edge. Full tang construction runs the complete length of the teal resin handle and spreads weight evenly from blade tip to handle base. The balance point sits near the bolster, tipping weight toward the blade for cleaner chops without extra wrist force.
Handle Construction
The handle is shaped from teal marbled resin. The marbled pattern runs deep through the material it does not fade, chip, or peel through heavy use. Resin does not absorb moisture, does not swell in wet conditions, and holds its surface finish through outdoor and kitchen use equally well. Silver pins run through the handle to lock the scales firmly to the full tang. A lanyard hole sits at the base of the handle for cord attachment during outdoor carry or wall display. Bare-handed or gloved, the grip stays locked and firm through heavy chopping work.
Leather Sheath
The leather sheath protects the blade between uses and allows safe carry in a kit, bag, or camp pack. The blade seats fully with no movement. Draw is clean with one hand.
Best Used For
- Heavy meat prep, joint splitting, and thick cuts
- Camp cooking, ranch work, and outdoor food prep
- BBQ breakdown work before and after the smoke
- Collectors of rasp steel and working-style knives
- Gifting for hunters, camp cooks, and BBQ enthusiasts
Specifications
| Feature | Details |
|---|---|
| Overall Length | ~7.5 inches |
| Blade Length | 4 inches |
| Handle Length | 3.5 inches |
| Blade Steel | High-carbon rasp steel |
| Blade Hardness | 55–58 HRC |
| Blade Finish | Hand-finished rasp texture |
| Blade Profile | Sheepsfoot / bull cutter |
| Handle Material | Teal marbled resin |
| Pin Detail | Silver pins and lanyard hole |
| Construction | Full tang |
| Sheath | Leather sheath included |
Frequently Asked Questions
What is rasp steel and why is it used for this knife?
Rasp steel comes from hardened steel files and rasps. It is dense and high-carbon by nature, which makes it tough enough for impact cutting tasks and capable of holding a strong working edge at 55–58 HRC.
What is a sheepsfoot blade profile?
A sheepsfoot blade has a straight cutting edge and a spine that curves down to meet it at the tip. This keeps the full edge flat against the cutting surface for powerful, controlled push cuts with no wasted motion.
What is the lanyard hole for?
It lets you attach a cord for secure outdoor carry or hang the knife for display and wall storage.
How do I care for this knife?
Hand wash and dry straight after use. Apply food-safe mineral oil to the blade every few weeks. Store in the leather sheath in a dry place.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy