ANCHORS DIRE 8.8 HOT DIP GALV STUD M20X280 WITH NUT AND WASHER RSHDG20X2808. 8 HOT DIP GALV STUD M20X280 Explaining the difference between EN8 and 8. 8 steel as indicted 8. 8 is ISO 898 1 grading for Bolts and screws. It indicates a bolt screw with tensile strength of minimum 800MPa and a yield strength of 80% of 800MPa = 640MPa. Depending on thickness these are either quenched and tempered or can also be used without Q&T provided they meet the hardness and tensile requirements. EN8 is a medium carbon steel usually supplied

8.8 HOT DIP GALV STUD M20X280

Explaining the difference between EN8 and 8.8 steel as indicted

8.8 is ISO 898 1 grading for Bolts and screws. It indicates a bolt/screw with tensile strength of minimum 800MPa and a yield strength of 80% of 800MPa = 640MPa. Depending on thickness these are either quenched and tempered or can also be used without Q&T provided they meet the hardness and tensile requirements.

EN8 is a medium carbon steel usually supplied untreated. EN8 has good tensile strength and is often used in applications such as: shafts, gears, stressed pins, studs, bolts, keys etc.

EN8 is a very popular grade and is readily machinable in any condition. It can be further surface-hardened to produce components with enhanced wear resistance, typically in the range 50-55 HRC through induction processes. It is also available in a free-machining versions, EN8DM and EN8M (212A42)

<Elements available in EN8:

• Carbon 0.36-0.44%
• Silicon 0.10-0.40%
• Manganese 0.60-1.00%
• Sulphur 0.050 Max
• Phosphorus 0.050 Max