Ninja Aluminum HPA Tank - 13/3000 - PRO V2 SHP REG (1100 PSI)

Ninja Aluminum HPA Tank - 13/3000 - PRO V2 SHP REG (1100 PSI)PRESET 1100 PSI OUTPUT OPTIONAL 950 PSI OUTPUT The SHP V2 Regulator is a Super High Pressure regulator that we have designed specifically for Tippmann markers running a Response Trigger and for Automag owners using a Reactive Trigger. There have been many instances, especially with the Tippmann's running RT and or Cyclone Feed, where we have seen problems with the marker not working properly and it was due to the tank regulator not outputting enough

PRESET 1100 PSI OUTPUT / OPTIONAL 950 PSI OUTPUT

The SHP V2 Regulator is a Super High Pressure regulator that we have designed specifically for Tippmann markers running a Response Trigger and for Automag owners using a Reactive Trigger. There have been many instances, especially with the Tippmann's running RT and/or Cyclone Feed, where we have seen problems with the marker not working properly and it was due to the tank regulator not outputting enough pressure to run all of the air-assisted upgrades on the marker. Our answer to this problem is the SHP Regulator. The regulator has two different output pressures depending on which marker you are shooting. For the Tippmann markers running a Response Trigger, you can remove 1 shim to reduce the pressure to 950psi. Ninja Paintball does not recommend using the 1100psi setting on your Tippmann marker. If you are shooting an Automag and you want to increase the sensitivity on your Reactive Trigger, leave the pressure set to 1100psi. If you don't want as sensitive of a trigger, you can adjust it down to 950psi.

GREAT FOR THESE MARKERS:

• Tippmann markers with Response Trigger installed
• Automag markers with Reactive Trigger installed
• Also great for some air rifles

REGULATOR FEATURES:

• MADE IN THE USA!!!!
• All black tactical look
• SRT piston –Sonic Recharge Technology piston – plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down
• SPA – Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons
• MFV – Mini Fill Valve – Non wrist digging, low profile design fill valve
• Brass or optional Aluminum bonnet - see regulator parts for details
• Meets all DOT, CGA and ASTM specifications
• Completely rebuildable by the user
• Every regulator is hand crafted and factory tested
• Super low response curve 0-50 psi from full to empty

Safety

• ASTM COMPLIANT bonnet thread
• ASTM COMPLIANT DOT burst disc
• ASTM COMPLIANT Low pressure burst disk
• ASTM COMPLIANT Restrictor, bleed hole and safety groove
• Mini Fill Valve IS hardened, plated 5000 psi rated

Tank Features

• 13 cubic inch
• 3000 psi
• D.O.T. Approved Aluminum bottle
• 5 year hydro
• 9 3/8 inches long x 2 inches diameter
• 1 3/8 inches bottle to ASA
• Gives you 125 shots per fill depending on marker.