Biodry DPC Cream - 5L - Biokil Crown

Biodry DPC Cream - 5L - Biokil CrownBiokil Crown Biodry DPC Cream 5L High Performance Injection Cream for Long Term Rising Damp Protection Biokil Crown Biodry DPC Cream (5L) is a silane siloxane based injection cream developed to stop rising damp in brick, stone, and mortar constructions. Formulated for deep penetration and permanent water repellency, it creates an effective chemical damp proof course (DPC) once injected into mortar beds. Supplied in bulk for large scale application, it

Biokil Crown Biodry DPC Cream – 5L

High-Performance Injection Cream for Long-Term Rising Damp Protection

Biokil Crown Biodry DPC Cream (5L) is a silane/siloxane-based injection cream developed to stop rising damp in brick, stone, and mortar constructions. Formulated for deep penetration and permanent water repellency, it creates an effective chemical damp-proof course (DPC) once injected into mortar beds. Supplied in bulk for large-scale application, it is ideal for professional use in refurbishment and remedial damp-proofing works.

The cream is odourless, solvent-free, and easy to apply using standard electric or manual injection pumps. It diffuses into the wall substrate and reacts with moisture to form a durable barrier, preventing moisture from rising through capillary action.

Key Features & Benefits

• Long-Term Damp Protection: Effectively controls rising damp by forming a water-repellent barrier.
• Silane/Siloxane Formula: Deep penetrating chemistry ensures excellent diffusion and durability.
• Ideal for Large Projects: Supplied in 5L container for efficient application across multiple walls or properties.
• Low Hazard: Odourless, solvent-free, and suitable for use in occupied buildings.
• Compatible Substrates: Suitable for solid wall construction including brick, stone, blockwork, and mortar.

Product Details

• Type: Silane/siloxane-based DPC injection cream
• Form: Cream
• Colour: White (becomes translucent during diffusion)
• Container Size: 5 Litres
• Coverage: Approx. 41–43 linear metres of 215mm thick solid wall (depending on application method and substrate)
• Application Tools: Electric or manual injection pump

Application Instructions

1. Drill Holes: Drill 12mm holes horizontally into the mortar course at 120mm intervals, typically 150mm above ground level.
2. Inject Cream: Use a suitable pump to inject the cream from the back of the hole to the front in one continuous motion.
3. Allow to Cure: The cream will migrate into the surrounding substrate and cure to form an effective DPC.
4. Finishing: Plug holes and apply salt-resistant plaster or render if required.

Limitations

• Do not apply to saturated or waterlogged walls.
• Not suitable for use on gypsum plaster or timber surfaces.

Health & Safety

Wear gloves and eye protection during application. Ensure adequate ventilation in enclosed areas. Refer to the Safety Data Sheet (SDS) before use.