JUN AUTO High Lift Camshafts IN For NISSAN RB26DETT 1004M-N242

JUN AUTO

1004M-N242

NISSAN

RB26DETT

(Product No.: For R32/R33, R34 common)
Advanced Camshaft Series: This series is for high power engine because the cam lift is high very much.
Spec (unit: mm)
Duration: 72 (288)
Lift: 11.65
BC: 29
VC: 0.30
IN
* VC=Valve Clearance (cool conditions)

[REQUIRED]Cam lobe refuge machining
[REQUIRED]Reinforced valve spring
[REQUIRED]Special valve retainer
* The height of lift shows the valve lift.
* The camshaft which is 10.5mm or higher lift of the profile needs to trim your cylinder head.
* You may need to trim your cylinder head according to the conditions of your cylinder head even if it is under 10.5mm so that a cam lob does not hit to the cylinder head.
* The camshaft which is 11.35mm or higher lift of the profile needs to use valve springs for high lift.
* The camshaft which is 10.8mm or higher lift of the profile needs to use the exclusive use valve retainers (+0.5mm offset).
* The camshaft which is 11.35mm or higher lift of the profile needs to use the exclusive use valve retainers (+1.5mm offset).
* We prepare the Camshaft Kit which contains valve springs and valve retainers.
* Intake camshafts for BNR34 are same as the BNR32/BCNR33

Images are for illustration purpose only. Actual product may vary.