point 7 double xxl pulley alu verlangerung

Having the right tools is half the work done. The Point-7 extensions are based on a very simple, indestructible system that is quick and easy to use and allows for effortless downhaul, even on very large sails.
The pulley and cleat system is attached directly onto the aluminum tubing, with no crossing lines. With the brass rollers, downhaul efforts are reduced to the absolute minimum.

Quick functionality points on the base system:

• Double inverted XXL pulleys to save lots of power from pulling downhaul.
• Easy clean free threading through pulley to use gravity to insert the rope.
• Free cleat for no rope friction when down hauling.
• Rigs on both sides as cleat is on the side of the pulley system.  

The 2XXL pulleys allow you to downhaul the sail with much less effort than with the normal wheel size. More space to insert the rope in the pulleys. The cleat has no bridge on top to guide the rope when downhauling. This gives much more freedom to pull, less friction, and when combining these 2 characteristics, it makes downhauling much lighter and easier. There is no need to have cleats on both sides for rigging on port tack or starboard tack as the cleat is free and easy to lock the rope on both tacks.

The extension tubes are made from strong T8 grade aluminum and are available in lengths of32 cm/48 cmwith adjustment increments of 2 cm. The extensions can be sailed at the full 32 cm or 48 cm extension heights and are supplied with the original Marlow 3.8 mm Formuline rope.